User's Manual

- 15 -
(2) The carrier cannot be selected for mixed channel receiving. It must choose CTCSS, CDCSS or
–CDCSS.
3.6.4 Programming Menu
Read: read data from transceiver.
There will be a progress bar indicating progress during the reading process, and you can set to
automatically exit the data window when the data is fully read.
Write: write the configured data into transceiver.
There will be a progress bar indicating progress during the writing process, and you can set to
automatically exit the data window when the data is fully written.
Notice:
(1) Check the network status before reading data and make sure that internet option is ticked. The IP
on the software tool bar should be same as the transceiver IP.
(2) When the connection is completed, it shows “internet OK” on the status bar, or it shows “internet
XX”.
Upgrade: you can download each function module from PC to transceiver and configure with main
parameters.
Select the path for upgrade package before upgrade.
4 Trouble shooting
A. Programming Software Connection Failure