User's Manual

- 12 -
transceiver does not accept other calls. After the call hang time is over, the call ends and the channel
resources will be released. Value range: 0~7000 milliseconds; step value is 500 milliseconds; 4000
milliseconds by default.
Emergency Call Hang Time: after an emergency call is initiated, and if no PTT button is pressed on
both parties, the transceiver will keep call hang time for the terminals. During the call hang time, the
transceiver does not accept other calls. After the call hang time is over, the call ends and the channel
resources will be released. Value range: 0~7000 milliseconds; step value is 500 millisecond; 4000
milliseconds by default.
Call Hang Time: after the terminal call ends, the transceiver keep call hang time for the terminal. During
this time, press PTT button without having to establish connection to continue the call. Value range:
0~7000 milliseconds; step value: 500 milliseconds; 4000 milliseconds by default.
• Internet Settings
Local IP：transceiver IP address, such as 192.168.1.100.
Subnet Mask: the transceiver subnet mask in local area network, such as 255.255.255.0.
Gateway: the transceiver gateway in the local area network, such as 192.168.1.1.
DNS：configure the domain name server or set it as 0.0.0.0.
Networking Modes: supports three modes including: no network, as server or as slave device. When it is