User's Manual

- 10 -
3.5 Emergency Alarm
The emergency indicator glows during abnormal situations, for example, when RX frequency lost lock,
the emergency indicator flashes every one second and when TX frequency lost lock, two seconds.
When both TX and RX frequency lost lock, the indicator glows constantly. Please turn to professional
technician for help when abnormal situations happen.
3.6 Programming Software
Please check the network status before programming the transceiver. First make sure the network
button on the tool bar is pressed(the IP address option will be grayed out if it is not pressed) and also
make sure the connection button is pressed. In case of the connection button is pressed, the
programming software will automatically connect to the matched transceiver through IP according to the
IP address; the status bar will show ”XX network” after the connection is completed. If there is another
programming software trying to connect to the same transceiver, it shows busy network status on the
second software, meanwhile, the connection button will pop up automatically, and you need to click it for
re-connection.
3.6.1 Menu
New: creates new channel information. The transceiver creates new channel information configuration
file and one analogue channel by default with default parameters.
Open: open the file saved on the device.
Save: saves information configuration on the current channel.