User Manual DP990 DMR Two Way Radio User Manual DP990 DMR Two Way Radio We are very grateful for your purchasing Kirisun brand two-way radio produced by Kirisun Communications Co., Ltd We believe Kirisun two-way radio, which always incorporates the latest technology, can bring great convenience to your life and work. We also believe that the quality and function of Kirisun two-way radio can meet your demands for reliable communication.
User Manual DP990 DMR Two Way Radio Notice ◆ Please carefully read this instruction manual before using the product for your easy operation. We will consider that you have read this manual when you use the product. ◆ Please carefully keep the manual for future reference. ◆ In order to protect your legal rights from infringement, please carefully fill in the warranty card and claim valid receipt.
User Manual DP990 DMR Two Way Radio Safety Precaution ◆The radio can only be repaired or maintained by professional technicians. The user must not disassemble the radio at liberty. ◆In order to avoid problems caused by electromagnetic interference or electromagnetic incompatibility, please turn off the radio in the place such as hospital, plane and other health care centers where there is a sign such as “Turn off Your Radio”.
User Manual DP990 DMR Two Way Radio Battery ◆If the conductive substance on human body makes contact with the exposed battery terminal, it may damage your belongings, and/or do harm, such as burning, to human body. Conductive material includes jewelry, keys or bead-like necklace. They can form a loop (it causes short circuit) with battery and cause skin burn after the rapid temperature rise.
User Manual DP990 DMR Two Way Radio Content 1 UNPACKING AND CHECKING ................................................................................... - 2 - 2 BATTERY INFORMATION ........................................................................................... - 3 - 3 INTRODUCTION............................................................................................................ - 7 - 4 BASIC OPERATION .............................................................................
DP990 DMR Two Way Radio User Manual 12 MAJOR TECHNICAL SPECIFICATION ................................................................ - 42 - 13 FCC STATEMENT ...................................................................................................
User Manual DP990 DMR Two Way Radio 1 Unpacking and Checking Please carefully open the box, and check if the accessories listed below are contained in the package. For any missed or damaged item, please contact your local dealer for solution. 1.
DP990 DMR Two Way Radio User Manual 2 Battery Information 2.1 Battery Charging 1) Plug the power adaptor in the proper socket of AC power. 2) Plug the cable of the power adaptor at the back of the socket, and the green indicator glows. 3) Plug the battery or radio in the charger Make sure that the battery is in proper contact with the charger terminal, and the red indicator glows. 4) After the battery is charged for 5 hours, the red light goes out, indicating that the battery is fully charged.
DP990 DMR Two Way Radio User Manual it should be charged repeatedly to gain full battery capacity. The battery should be at least charged once every three months. When the battery is fully charged or the battery power is above the level of low power alert, do not charge the battery, or it may affect the battery life and performance. Please take out the battery from the charger after it is fully charged.
DP990 DMR Two Way Radio 2.3 Detaching the Battery For detaching the battery, please turn off the radio. As shown on the right picture, lift the battery latch to bounce the battery, and slide the battery downwards to take it out. Note: Do not throw the battery terminals with short circuit or battery into fire. Do not remove the battery case without permission. 2.4 Attaching the Antenna As shown in ①, align the antenna with the interface at the radio top, and turn it clockwise to fasten.
DP990 DMR Two Way Radio 2.5 Attaching the Audio Accessories Connect the audio accessory in the port and fix it with screw 2.6 Attaching the Belt Clip Align the two screw holes in the belt clip with the holes at the back of the radio, and fix them together with screws. Loosen the screws to detach the belt clip.
DP990 DMR Two Way Radio 3 Introduction User Manual
User Manual DP990 DMR Two Way Radio No. Part Name No. Part Name No.
DP990 DMR Two Way Radio 4 4.1 User Manual Basic Operation Powering on/off To power on the radio, turn the power/volume knob clockwise until a click is heard; the LCD screen displays the power-on image and the backlight is on automatically; an alert tone and a sligt vibrating hint (created by motor)will sound and shake at the same time . To power off the radio, turn the power/volume knob counter-clockwise until a click is heard 4.
DP990 DMR Two Way Radio User Manual 4) Press【OK】 key to switch to the selected zone. 4.4 Selecting the Channel Turn the channel selector knob to select channel Each channel can be configured as analogue or digital. Turn the channel selector knob to switch between digital and analogue channel. When the channel is switched from digital to analogue, certain features are no longer available such as short message and etc. 4.
DP990 DMR Two Way Radio 7) Press to enter the menu item 8) Press to return to the last menu or the main interface. 9) Press to return to the main interface. 4.7 User Manual Icon Signal strength More bars indicate stronger signal and less bars weak signal. It only show up when receiving. Battery indicator Less space indicates more battery power.
DP990 DMR Two Way Radio Emergency Encryption Man Down Talkaround GPS is receiving GPS positioned Icon whirling indicates it is scanning The scan stays on priority channel 1 The scan stays on priority channel 2 IDType： Private call Group call All call Menu Selection： Selected Not selected User Manual
DP990 DMR Two Way Radio 4.8 User Manual LED Indication Red Indicator glows：the radio is transmitting. Green Indicator glows: the radio is receiving signals (speech message, text message and data) or it detected activity on the channel. Orange indicator glows: orange indicator glows during the call hang time in digital mode or auto reset time in analog mode.
User Manual DP990 DMR Two Way Radio 5.4 Receiving/Responding to a Call 1) LED indicator glows. 2) LCD displays icon of call type ( icon . private call, group call, all call), alias or ID and incoming 3) Broadcasts received call. 4) You can press the PTT key during the call hang time to call the current contact. Note: For receiving call from group, the radio must be a member of the group (set by dealer with programming software).
User Manual DP990 DMR Two Way Radio b) Enter text contents through keypad. c) Press d) Press【#】 key to switch typewriting and 【*】 key to switch to lower/upper case. e) In the non-digital input mode, press【1】 key to enter punctuation. f) Press the delete key to delete the character right before the cursor. to move the cursor to the right/left. 5) Press OK key after the message is edited and send, save or delete the message. 6) Select “send” and enter the “contact” interface.
DP990 DMR Two Way Radio User Manual 3) Select “template” and enter quick message list. 4) Select the target quick message in the list and press OK key to enter the editing interface. You can edit the quick message. 1) Press OK key to send, save or delete the edited message. 2) Select “Send” and enter the “Contact” interface. 3) Select the contact list and press OK key to enter. 4) Select the target contact and press OK key to send the edited message.
DP990 DMR Two Way Radio User Manual 3) Select “Status Message” and enter status message list. 4) Select the target status message and press OK key to enter the interface of status message. 5) Press “Send” key and enter the “Contact” interface. 6) Select “Contact List” and press OK key to enter the contact list interface. 7) Select the target contact and press OK key to send the selected status message.
DP990 DMR Two Way Radio 6.5 User Manual Deleting Short Message You can delete the message that is sent, received or saved. 6.5.1 Deleting the Message by Batch 1) Press to enter the menu. 2) Select and enter “ short message” menu. 3) Select “Delete Message” and enter the interface. 4) Select the mailbox of the message to be deleted (inbox, outbox or draft box) and press OK key to delete the message in the box. Or you can select “Delete All” to delete all the messages. 6.5.
DP990 DMR Two Way Radio User Manual 7 Emergency During emergency, you can send a confirmed emergency alarm and an emergency voice message to the specified radio group. You can initiate an emergency alarm anytime even when it is receiving signals. The radio supports three kinds of emergency alarm mode.
User Manual DP990 DMR Two Way Radio icon is and the outgoing call icon is . 2) When the radio receives response, the LCD will show “Emergency Alarm Succeeded”. If the radio failed to receive response and when the retry count is used up, the LCD will show “Emergency Alarm Failed”。 3) The radio exits the emergency mode and returns to the home screen. Note: If you radio is set as “Secret” or “Secret with Voice”, there will be no audio/visual alert.
DP990 DMR Two Way Radio User Manual 7.3 Exiting Emergency Alarm The radio will exit the alarm mode under the circumstances listed below: Receives emergency alarm response on Emergency alarm mode. The emergency alarm retry count is used up and no response is received. Press and hold the programmable button programmed as “Emergency Exit” 8 Call Log Through the call log, you can check and manage recent outgoing call, incoming calls and missed calls onthe radio. The call log records private call only.
DP990 DMR Two Way Radio User Manual 2) Select the target record which needs to be saved and you can press OK key to check, save or delete the target record. 3) Select “Save” and enter the interface for adding contact. 4) Enter the contact name. 5) Press Ok key to save the contact.. 8.3 Deleting Call from the Call List 8.3.1 Deleting all the Records from the List. 1) Press in the home screen to enter the menu. 2) Select and enter “ call log” menu.
DP990 DMR Two Way Radio User Manual 9 General Setting 9.1 Language Selection You can switch the radio languages. 1) Press in the home screen to enter the menu. 2) Select and enter “ setting” menu. 3) Select “Language Selection” and enter the interface. 4) Select the language and press OK key for switching to the language. 9.2 Alert Tone Setting You can enable/disable the alert tone and adjusts the volume. 9.2.1 Enable/disable the Alert Tone 1) Press in the home screen to enter the menu.
DP990 DMR Two Way Radio User Manual “Information Alert Tone” – enables/disables the alert tone of receiving short message. “Finished Call Alert Tone” – enables/disables the alert tone of finished call. Press OK key and the LCD will show “Operation Succeeded” and save the alert tone. 9.2.2 Adjusting the Volume of Alert Tone 1) In the alert tone setting interface, select and enter the “Alert Tone Volume” interface. 2) Press【Up】 key or 【Left】 key to increase the alert tone volume.
DP990 DMR Two Way Radio User Manual 4) Press OK key and the LCD will show “Operation Succeeded”. The vibration alert will be saved. 9.4 Power Level Setting You can set high/low power for each channel. 1) Press in the home screen to enter the menu. 2) Select and enter “ setting ” menu. 3) Select “Power Setting” and enter the interface. 4) Select “High” or “Low” power and set the power level. 5) Press OK key and the LCD will show “Operation Succeeded”. The power level will be saved. 9.
User Manual DP990 DMR Two Way Radio 3) Press OK key and the LCD will show “Operation Succeeded”. The auto lock time is saved. During the set time, the keypad will be locked automatically if no operation is performed on it. 9.5.3 Locking the Keypad Quickly Press 【*】key in any interface to lock the keypad. 9.5.4 Unlocking the Keypad When the keypad is locked, press 9.6 and then 【*】key to unlock the keypad.
DP990 DMR Two Way Radio User Manual 4) Select the backlight duration for the screen. 5) Press OK key and the LCD will show “Operation Succeeded”. The time setting for turning off the screen will be saved. During the set time, the radio will turn off the screen if no operation is performed. Press any key to restore the brightness。 9.8 Indicator Setting You can turn on/off the LED indicator based on different situation. 1) Press in the home screen to enter the menu. 2) Select and enter“ setting” menu.
DP990 DMR Two Way Radio 9.10 User Manual Squelch Level Setting You can adjust the squelch level based on different situation to remove unnecessary calls in weak signals。 This setting is valid on analogue channel. 1) Press in the home screen to enter the menu. 2) Select and enter “ setting” menu. 3) Select “Squelch Level” and enter. 4) Press【Up】 key or【Left】 key to increase the squelch level and 【Down】 key or 【Right】 key to decrease the squelch level.
DP990 DMR Two Way Radio User Manual 10 Advanced Features 10.1 Radio Check Radio Check feature is used to check whether the target radio is activated in the system. The target user will automatically send a response to the caller radio without any audible or visual indication. 1) Press in the home screen to enter the menu. 2) Select and enter“ Or you can press contact” menu. in the home screen to directly enter the “Contact” menu. 3) Select and enter the “Contact List” interface.
DP990 DMR Two Way Radio 10.2 User Manual Call Alert Call Alert feature allows the caller radio to request the target radio to call back. 10.2.1 Receiving and Responding to Call Alert 1) When the radio received call alert, it will automatically reply if call alert decode is enabled. The LCD shows “Call Alert…” , the alias or ID of caller radio. The radio periodically sounds alert tone and orange LED is flashing.
DP990 DMR Two Way Radio User Manual Note： If you press when sending “call alert”, the radio will exit the call alert mode. If the retry count is used up and no response is received, the radio will automatically stop sending call alert and display “Call Alert Failed” on the screen. 10.3 Radio Stun/Un-stun Stun/Un-stun feature allows the radio to stun/un-stun the target radio through air signaling.
DP990 DMR Two Way Radio User Manual 3) Select “Stun/Un-stunned”. 4) Enter “Contact List” and select the target private call contact. The screen shows the alias or ID of the target radio and the radio indicates that it is sending stun/un-stun signaling. The red indicator glows. 5) Waiting for response from the target radio. If the response from the target radio is received, the screen will show “Stun Succeeded”/“Un-stun Succeeded”, or it shows “Stun Failed”/“Un-stun Failed”.
DP990 DMR Two Way Radio User Manual Note: Once the radio is killed, the configuration data will be lost and the radio cannot go back to normal after reboot, so please operate with due care! The killed radio can only be revived by authorized dealer or supplier. 10.5 Remote Monitor Remote Monitor allows the user to turn on the microphone of the target radio through air signaling. There will be no audible or visual indication on the target radio.
DP990 DMR Two Way Radio User Manual Note: If you press monitor mode. when the radio is sending remote monitor signaling, it will stop and exit the remote If the retry count is used up and no response is received, the radio automatically exits the mode and shows”Remote Control Failed”. 10.6 Scan In order to receive voice and data from multiple channels, the radio can be programmed to scan these channels.
DP990 DMR Two Way Radio 10.6.2 User Manual Editing the Scan List 1) Press in the home screen to enter the menu. 2) Select and enter “ Scan” menu. 3) Select “Editing Scan List”. You can operate as below on the scan list: Add: add the target channel to the scan list. Delete: delete the target channel from the scan list. Editing Priority: set the channel priority on the scan list. 10.6.3 Enabling/disabling Scan 1) Press in the home screen to enter the menu. 2) Select and enter “ Scan” menu.
DP990 DMR Two Way Radio User Manual 3) Wait for the alert tone of transmission permission to end and speak to the microphone. 4) Release PTT key to receive. 5) If you did not respond during the scan hang time，the radio will go on to scan other channels. 10.7 Man Down 1) Press in the home screen to enter the menu. 2) Select and enter “ Application” menu. 3) Select “Man Down” and enter the interface. 4) Select “On” or “Off” to enable/disable Man Down. 10.
DP990 DMR Two Way Radio 2) Select and enter“ User Manual Application” menu. 3) Select “VOX” and enter “VOX” interface. 4) Select and enter “VOX Level” interface. 5) Press【Up】key or【Left】key to increase VOX level or【Down】key or【Right】key to decrease VOX level. 6) Press OK key and save the VOX level and return to the VOX setting interface. 10.
DP990 DMR Two Way Radio User Manual 4) Select and enter “GPS Switch” interface. 5) Select “On” or “Off” to enable/disable GPS. 10.9.3 Enabling/disabling GPS 1) Press in the home screen and enter the menu. 2) Select and enter “ Application” menu. 3) Select “GPS” and enter “GPS” interface. 4) Select and enter “GPS Report On/Off” interface. 5) Select “On” or “Off” to enable the GPS Report feature. 10.10 Time 1） Press in the home screen to enter the menu. 2） Select and enter “ Application” menu.
DP990 DMR Two Way Radio User Manual 10.12 Bluetooth 1） Press in the home screen and enter the menu. 2） Select and enter “ Bluetooth” menu. 3） Select “Bluetooth Switch” and enter the interface. 4） Select “Enable Bluetooth” or “Disable Bluetooth” to enable/disable Bluetooth. 5） After the bluetooth is enabled, go back to the Bluetooth menu and select “Device Available”. 6） Select “Search Device” to search for device that matches. 7） Select “Connect”.
User Manual DP990 DMR Two Way Radio 11 Troubleshooting No. Troubleshooting Causes and Solutions A．Check if the battery is used up –charge the battery or change it if the power is out. B. Check if the power connecting pole is in proper contact with 1 Failed to power on battery –try again after re-attachment. C. Check if the battery contact is contaminated or in poor contact –clean the contact. A. Inconsistent frequency between radios – select a channel with Communication 2 failed the same frequency.
User Manual DP990 DMR Two Way Radio A. Poor antenna contact – fix the antenna. Failed to receive 3 B. Wrong RX/TX frequency – select the same TX/RX frequency. signals C. Beyond communication scope. The green indicator 4 A. Check if the volume is at its lowest level – increase volume. glows but no sound B. Check if the speaker is broken - change the speaker. is received A. Check if the antenna is dual mode - change to a dual-mode antenna. 5 GPS failed to locate B.
User Manual DP990 DMR Two Way Radio 12 Major Technical Specification General Specification Frequency Range UHF: 400-470MHz, Channel Capacity 1024 Channel Spacing 12.5kHz/20kHz/25kHz Weight 386 g (with battery and antenna) Size （height*width*thickness） 135.8mm*63.5mm*39.1mm Display 1.8 inches 65535 kind of color display Battery Capacity 7.4V 2000mAH lithium-ion battery Analogue: 12 hours Working Hour (5-5-90) Digital: 16 hours.
User Manual DP990 DMR Two Way Radio Work Environment Work Temperature -30℃~+60℃ Storage Temperature -40℃~+85℃ IP Rating IP67 Electrostatic Protection ±4kV (in contact) / ±8kV (air） Military Standard MIL-STD-810 C/D/E/F/G Damp proof MIL-STD-810 C/D/E/F/G Shock and Vibration MIL-STD-810 C/D/E/F/G
User Manual DP990 DMR Two Way Radio RX Frequency Stability ±1.5ppm Analogue RX Sensitivity 0.3uV（12dB SNR）/0.22uV（12Db SNR, typical） Digital RX Sensitivity 0.3uV（5% Inter-modulation ETSI: 65dB Adjacent Channel Selectivity ETSI/TIA603：60dB@12.5kHz，70dB@20/25kHz Spurious bit error rate） TIA603: 70dB Response ETSI/TIA603：70dB Suppression Conduction Spurious -57dBm Radiation Block ETSI：84dB TIA603：80dB Rated Audio Power 0.5W Rated Audio Distortion <3％ （typical） Voice and Noise -40dB@12.
User Manual DP990 DMR Two Way Radio TX Frequency Stability ±2.5ppm TX Power Low: 1W; High: 4W Voice and Noise -40dB@12.5kHz Conduction Spurious -36dBm@<1GHz，-30dBm@>1GHz Radiation Adjacent Channel Power 60dB@12.5kHz FM Modulation 9K84F3E@12.5kHz 4FSK Modulation 12.5kHz（data only）：7K24FXD 12.5kHz（data + voice）：7K24FXW Modulation Limit ±2.5kHz@12.
User Manual DP990 DMR Two Way Radio GPS TTFF（cold start）initial positioning time <1 min TFF（hot start）initial positioning time <10 seconds
DP990 DMR Two Way Radio User Manual 13 FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
DP990 DMR Two Way Radio User Manual -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Output power listed is rated conducted. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%.
