User's Manual

DP586 DMR Two Way Radio User Manual
31
7.3 Initiating a Call during Scan
When the radio is scanning, press PTT button and the radio will transmit and talk on the predefined
channel. This channel is set by dealer.
7.4 Priority Scan
When there is priority scan set in the scan list, the priority scan will be automatically enabled when the
radio starts the scan feature. The priority scan mode is cycle scan, and it scans priority channel every
time when it scans a conventional channel. For example, if there are channel 1, 2, 3, 4 in the scan list
and channel 2 is priority channel, the scan cycle will be 1->2->3->2->4->2->1.
7.5 Kill and Unkill
If the dealer enables and sets Kill and Unkill, the radio is able to receive and decode the Kill/Unkill
signals from other radios. After being killed, the radio cannot transmit or receive any signals but
activation signal. After being activated, the radio will be back to normal state. Kill/Unkill feature is valid