DP586 DMR Two Way Radio User Manual User Manual DP586 DMR Two Way Radio We are very grateful for your purchasing Kirisun brand DMR Two Way Radio produced by Kirisun Communications Co., Ltd. We believe Kirisun two-way radio, which always incorporates the latest technology, can bring great convenience to your life and work. We also believe that the quality and function of Kirisun two-way radio can meet your demands for reliable communication.
DP586 DMR Two Way Radio User Manual Notice to user ◆ Copyright Kirisun and our authorized partners own the intellectual property of all the parts of this product (include accessories). Any design and materials may not be modified, copied, extracted or translated without the authorization of Kirisun or its authorized parities. Due to the update or modification of the product, Kirisun owns the right to change the specifications of software and hardware described in this manual without further notice.
DP586 DMR Two Way Radio User Manual Your radio complies with the following of RF energy exposure standards and guidelines Institute of Electrical and Electronic Engineers (IEEE) C95.1-1992 Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998 ◆ Using the designated accessories Use the antenna, battery, adapter or charger supplied or sold by Kirisun only, or otherwise it causes damage to the product.
DP586 DMR Two Way Radio User Manual 4. Do not operate the radio, disassemble or charge the battery in the potentially flammable and explosive atmosphere (such as gas station, coal gas station, etc.). 5. Do not place the radio under the direct sunlight or near the area with heating devices. 6. Do not place the radio in the area with great dust, moisture or drips, or on the unstable surface. ◆ Operating Attentions Antenna Do not use any portable radio that has a damaged antenna.
DP586 DMR Two Way Radio User Manual Do not disassemble the radio by yourself. This product can only be maintained by the professional technicians. Contact us or your local dealer for help if you want to re-develop or modify the radio.
DP586 DMR Two Way Radio User Manual FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to part 15 of the FCC Rules.
DP586 DMR Two Way Radio User Manual NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. SAR warning Output power listed is rated conducted. This device must be restricted to work-related operations only in an Occupational/Controlled RF exposure environment and must operate with a duty factor not exceeding 50%.
DP586 DMR Two Way Radio Technical Parameters PMR: Operation Frequency Range: 400 to 470MHz Rated Output Power: High Power: 4W / Low Power: 1W Modulation Type: Analog: FM / Digital: 4FSK Channel Separation: Analog: 12.5kHz Digital: 12.5kHz Bluetooth: Supported Type: Bluetooth 4.2 EDR+BLE Modulation: EDR: GFSK, π/4QPSK, 8DPSK / BLE: GFSK Operation Frequency: 2402 to 2480MHz Channel Number: EDR: 79 / BLE: 40 Channel Separation: EDR: 1MHz / BLE: 2MHz GPS: Modulation: MSK Operation Frequency: 1575.
DP586 DMR Two Way Radio User Manual Waste Electrical and Electronic Equipment recycling This symbol on the product or its packaging indicates that this product must not be disposed of as household or commercial waste. Some countries have set up collection and recycling systems for waste electrical and electronic products.
DP586 DMR Two Way Radio User Manual DP586 Quick Reference Brief Introduction 1．Attaching the antenna: put the antenna into the antenna interface, and rotate the antenna clockwise to fix it. 2．Powering on: rotate the power/volume knob to power on the radio. 3．Channel Selection: rotate the channel selection knob to select channel.
DP586 DMR Two Way Radio User Manual 10
DP586 DMR Two Way Radio User Manual Contents CAUTION ................................................................................................. 错误!未定义书签。 TECHNICAL PARAMETERS ...................................................................................................... 7 RESTRICTIONS FREQUENCIES ARE VALID FOR THE EUROPEAN COUNTRY .. 错误!未定义书签。 RESTRICTIONS ARE VALID FOR THE EUROPEAN COUNTRY......................... 错误!未定义书签。 Disposing of batteries ............................................
DP586 DMR Two Way Radio User Manual 3.1 ATTACHING/DETACHING THE BATTERY ............................................................................... 18 3.2 ATTACHING/DETACHING THE ANTENNA .............................................................................. 19 3.1 ATTACHING/DETACHING THE BELT CLIP ............................................................................. 19 3.2 WHEN DETACHING, LOOSEN THE TWO SCREWS ON THE BELT CLIP AND REMOVE THE BELT CLIP. 3.3 ...........................
DP586 DMR Two Way Radio User Manual 6.3 ADJUSTING THE VOLUME ..................................................................................................... 28 6.4 INITIATING A CALL ................................................................................................................ 28 6.5 RECEIVING ........................................................................................................................... 29 6.6 REPLYING TO THE CALL ........................................
DP586 DMR Two Way Radio 1 User Manual Unpacking and Checking Please carefully open the box, and check if the accessories listed below are contained in the package. For any missed or damaged item, please contact your local dealer for solution. 1.
DP586 DMR Two Way Radio User Manual 1 Radio 1 User Manual 2 Battery Information 2.1 Notice The battery is not charged before delivery, so please charge the battery for your first use. If the battery is not used for a long time or the battery is used up, please charge it before use. Charge/discharge for twice or three times alternately to achieve its optimal performance. For low battery, please charge it or replace it.
DP586 DMR Two Way Radio User Manual charging will shorten the battery life. ◆Do not put the fully-charged battery back to the charger for re-charging, or it may shorten the battery life. ◆Please try to keep the battery in an indoor environment at around 25℃. The battery may get easily spoiled after being kept in the environment below -10℃ for a long time. ◆In temperature higher than 35℃ or below -10℃, the dischargeable power of the battery may decrease due to the physical property of lithium battery. 2.
DP586 DMR Two Way Radio User Manual (6) When the green indicator glows, keep the battery on the charger for 1-2 hours before taking it out so as to achieve the optimal performance. (7) Take out the power adaptor from the socket of AC power output. Note: The battery is not charged before delivery from the factory, so please charge the battery before your first use. Kirisun KB-75A lithium-ion can be used for this radio.
DP586 DMR Two Way Radio User Manual low power, and when you charge it in the charger, the indicator will glow after 1-5 minutes. 3 Attaching the Accessories 3.1 Attaching/Detaching the Battery ◆ Attaching the Battery (1) Slightly press the top of the belt clip as shown in ①; (2) Align the battery with the battery installation base at the back and insert the battery as shown in ②. (3) Slide the battery along the direction as shown in ③ until the battery is fit into the right position.
DP586 DMR Two Way Radio User Manual (2) Slide the battery latch along the direction as shown in ① to bounce the battery as shown in ②. (3) Slide to take out the battery along the direction as shown in ③. If there is belt clip, slightly press the belt clip top as shown in ④ and slide the battery along the direction as shown in ③ to take out the battery. Note: Do not throw the battery terminals with short circuit or battery into fire. Do not remove the battery case without permission. 3.
DP586 DMR Two Way Radio User Manual Align the two screws on the belt clip with the screw holes at the back of the radio. Use two 2.5x6.5 machine screws. 3.2 When detaching, loosen the two screws on the belt clip and remove the belt clip. 3.3 Attaching the Microphone Open the earphone cover plate on the right and connect the earphone cable to the port.
DP586 DMR Two Way Radio 21 User Manual
DP586 DMR Two Way Radio User Manual 4 Introduction 22
DP586 DMR Two Way Radio No. Part Name User Manual No. Part Name Power/Volume Knob Turn it clockwise to turn on the radio. For 1 Antenna 7 turning off the radio, turn counter-clockwise until a click is heard. When the radio is on, rotate the knob to adjust the volume. LED Indicator PTT key 2 Press this key to initiate a call and talk 8 Red indicator means the radio is transmitting, green means receiving and when the red indicator flashes, it means power shortage.
DP586 DMR Two Way Radio User Manual Programmable Keys” for further details External port 4 Alarm Key 10 Open the cover plate and connect the external speaker and microphone 5 Speaker Voice output。 11 Belt Clip 12 Battery Latch Channel Knob 6 5 Rotate the knob to select channel 1-16. Programmable Keys 5.1 Programmable Keys To suit the operation habits of customer, programmable keys (side keys) are available and can be set by dealer as shortcut key.
DP586 DMR Two Way Radio User Manual Short Press: press and release quickly. Long Press: press and hold for a while (press duration can be set by programming software) No. Programmable Feature Application 1 None No feature 2 High/Low Power Switch to high and low power If the current analogue channel has CTCSS, press this key and 3 Monitor switch to carrier squelch mode to cancel CTCSS; press it again to go back to the original state.
DP586 DMR Two Way Radio 7 Squelch Level 8 Scan 9 Alert Tone on/off 10 Zone Selection 11 12 5.2 User Manual Adjusts the signal strength required when receiving. Enable/Disable scan feature and listens to the communication activities on other channels. Repeater/Talk around Nuisance Delete Enable/disable all the alert tones. Press this key to switch among different zones. The zones are programmed by programming software. Enable/disable Repeater feature.
DP586 DMR Two Way Radio Glows red Transmitting Glows green Receiving Flashes red Low battery Flashes green Channels are being scanned Flashes orange Digital call hang time and it will exit when the hang time is up Glows orange Blank channel which is not available. Switch to other channel to exit.
DP586 DMR Two Way Radio User Manual 6.1 Powering on/off the Radio When the radio is off, rotate the power/volume knob clockwise until a click is heard to power on the radio. When the radio is on, rotate the power/volume knob counter-clockwise until a click is heard to turn off the radio. 6.2 Selecting the Channel When the radio is on, rotate the channel selector knob to select channels. 6.
DP586 DMR Two Way Radio User Manual 6.5 Receiving When the radio receives RF signal on the current channel and reaches squelch start level, the green LED glows to indicate that carrier is received. When the current channel is digital channel and when it received private call, group call or all call, the radio will output the voice from the channel.
DP586 DMR Two Way Radio 7 User Manual Features and Operation 7.1 TOT (time-out-timer) TOT prevents the user from occupying the channel for too long. If the continuous transmission exceeds the duration set by dealer, the radio will stop transmitting and sound alarm. For stopping alarm, release PTT button. For transmission again, please press PTT button after a certain time interval (interval set by dealer). If the dealer set pre-alarm feature, pre-alarm will sound before TOT time is up. 7.
DP586 DMR Two Way Radio User Manual 7.3 Initiating a Call during Scan When the radio is scanning, press PTT button and the radio will transmit and talk on the predefined channel. This channel is set by dealer. 7.4 Priority Scan When there is priority scan set in the scan list, the priority scan will be automatically enabled when the radio starts the scan feature. The priority scan mode is cycle scan, and it scans priority channel every time when it scans a conventional channel.
DP586 DMR Two Way Radio User Manual on digital mode. 7.6 Emergency In state of emergency, press the Emergency shortcut key to send emergency alarm. Emergency alarm consists of two parts: alarm type and alarm mode. Alarm mode is used to specify the contents sent to other members in emergency. You can ask your dealer to set these parameters based on your requirements. For exiting emergency, press again the Emergency shortcut key.
DP586 DMR Two Way Radio User Manual None: no alarm feature (default). Siren Only: after the radio enters the alarm state, the siren can only sound locally and the control center will not receive any alarm signals. Conventional: after the radio enters alarm state, there will be light and sound alert and it can also receive response from other members. Secret: after the radio enters alarm state, there will be no light or sound alert, and it cannot receive response from other members.
DP586 DMR Two Way Radio User Manual Only when both the color code and ID matches, the speaker can be turned on to receive. Range: 0~15 (16 groups of color codes) 8 Troubleshooting No. 1 2 Problem Cause and Solution Failed to power on Small during call A. The battery is used up –charge the battery or change to a new battery; B. Volume switch is faulty – repair at the specified service station; voice A. speaks too far from the microphone – the ideal distance: 3-10cm； B.
DP586 DMR Two Way Radio Failed to transmit 3 or receive 35 User Manual A. wrong channel parameters – reset the parameters and try again; B. the group identity for default contact is wrong – select a right group; C. Beyond the communication scope.
- 2 -
