User's Manual

60
3、 Q：If UMD is inundated, how to deal with?
A:Don’t start UMD rashly, otherwise it will cause more damaged for UMD.
2）Dismantle the adapter, battery and other external apparatus such as
CD-ROM, floggy drive and extended memory etc immediately.
3）Pour out the polluted water in UMD as fast as possible. Wipe the dirt with
the soft wet tissue or soft cloth and avoid abrasing the surface.
4）Dry UMD and parts with fan and deliver UMD to well trained engineer at
service center immediately.
5）If the carrying bag is also inundated, please don’t use it to carry UMD to
repair., otherwise it will cause second damage.
4、 Q: When UMD is in the status of Stand By or Hiberation, why cannot recovery the
system and what’s examining step?
Definition of Stand By or Hiberation
Stand By: Divide into mode S1 and mode S3 and S3 saves more energy than S1. The
default is mode S3. When the system enters into mode S1, it allows system
and application program store the running status into RAM. This mode only
uses a little power to maintain the memory staus of system data. You could
press any key to resume. However, when in mode S3, it needs press the power
switch to resume.
Hiberation
When the system enters into this mode, it allows system and application program store
the running status into hard disk and UMD cuts off the power. If you need
recovery, it needs to press the power swtitch.
4、 Q: The reason why cannot recover the system?
1） Storage malfunction: If the data store into the wrong RAM address, it cannot
recover the right running staus after storage.
2） The peripheral equipments are not compatible: It cannot cut off the power or
recovery after enters into Stand by or Hiberation, because disk structure is very