User's Manual

57
※ System hibernates
「system hibernates」transfer the data in the memory into hard disk then trun off the
power(power indicator lights is off), press “power” again,computer can return to original work
status.The default of Windows XP do not open 「system hibernates」mode,you have to open
「hibernates」volume label under windows of 「power options property」then choose the check
box of 「enable hibernate」so that you can see the 「system hibernates」settings under the
「power options property」windows
How to enter into suspended state
Click 「start」→「turn off」,choose 「standby」shown as below,system can enter into 「standby
mode」(if you need system hibernates please press <Shift> then 「hibernates mode」option
appear )
If system is under standby mode for a long time and the device do not connect to power supply,
the device exhausts all the power of the battery,system will transfer the present work to hard
disk then power off the battery until the battery is recharged or computer connect with the
power supply,system returns to work.
When the device do not connect to power supply,the time under standby mode depends on the