User's Manual

Step one: Turn off the power of UMPC, connect the cable of external display to UMPC

extension jack.

Step two: Contecting 15pin D interface of UMPC display to 15pin D interface of exteral

display.

Step three: Turn on UMPC power.

Step four: if want to display the menu to exteral display, please press + on the

panel, it can turn to exteral display or LCD display separately, or diplay them all together.

※ External display cable

See the picture as following, connect one connector of the cable to the extension jack on

the left side of UMPC, connect another connector to the exteral display, then it can be useful.

When take the connector off extension jack, please press both sides of clamp botton under the

jack, it can turn off easily.

Please pay attention to the directions when insert or turn off the cable from

extension jack. It is impossible to insert to the interface when the direction

reverse. Please don’t insert the cable overpower to avoid destroying

the interface.

4-2 External Keyboard and Mouse

UMD supports USB ports and they could connect with USB keyboard and USB mouse.

We recommend you to buy the keyboard with USB port, then you could connect with other