User's Manual

29
System protection
In the BIOS setup program’s security menu can also set a group of administrators
password ,and a set of user password ,at each boot or enter the BIOS setup grogram will ask
for a password to avoid unauthorized users from operating your computer.
2-1 Install battery module
There are two ways of power supply in this product : connect transformer and battery
supply. For use the convenience of the latter difficult to get out of your use of AC power, In
generally , use at home or office please use the transformer.
This product comes with a rechargeable battery module , battery adopted module design.
When you open the packing ,battery module is not installed in the ultra-mobile computer with
the host ,but under the attachment box,,please follow those steps to insert the battery slot:
Step 1: Put the bottom of computer up the dest .(please note do not put the desktop
in the rough desk in order to avoiding scratching the surface of chassis )
Step 2: Battery module fixed module should be move as the picture 1 with the
direction of the arrow to “open” posititon.
Step 3: According to the picture 2 arrow direction ,toward the back of host parallel.
Step 4: When it locked , please move the battery module fixed switch to OFF
position as the arrow direction of picture 1,then battery can be fixed firmly.
When the ultra-mobile computer connect the transformer,it will charge the
battery of ultra-mobile computer. Once full charge, transformer will
stop charging