User's Manual

23
inconvenience and harm if the hard disk damaged
Upgrade the firmware and drivers for the host re※ gular,
it will keep your UMPC in good status of compatibilty and stability.
1-3 Use outside
Please make sure cut off the power before move the UMPC,pull up all the connecting
wire to avoid damaging the interface.If you use UMPC outside,please follow the steps as
below and check the notice carefully.
If you drive to go out with UMPC,please don’t leave the machine
under the sun.If you need to leave the UMPC in the car,please put it in
the luggage at the corner where is more cool.
※ Notice for using outside
Step One:Make sure all the backup battery has fully charged,you can see the battery volume
display under the operating system.
Step Two: Shut down UMPC power switch.
Step Three: Pull out the AC adapter.
Step Four : Pull out all the connecting wires.
Step Five :Put the UMPC into the dedicated bag in order to avoid dust pollution and
collisions,and pay attention not to put too many items in the bag,so as to avoid
crushing the LCD screen.
Step Six: Please check if you carry all the following items: backup battery, transformer, adapter,
user manual and guarantee card etc. Please also don’t forget your power-on password
and hard disk.
If you need to take UMPC to a meeting and don’t want to close the current operating