User's Guide

Specifications
 Bluetooth Version: 5.0
 Bluetooth Range: Up to 10 meters
 Battery Capacity: 300mAh for Charging Case, 35mAh for Earbuds
 Charge Cycle: Around 3 times(2 x earbuds)
 Playing Time: Around 4 hours based on 50% volume
ON/OFF
1. Power On
① When the Earbud is inner the charging case, Press the open button on the bottom of the
charging case,The earbuds will pop out from the charging case, then the earbuds will enter into
the pairing mode automatically .
When the earbuds is out of the chargign case, Press and hold the earphone button for 3 seconds
to power on.
Both earbud’ indicator light will flash red and blue alternatly.
2. Power Off
① Put the earbuds back to the charging case, and the earbuds will turn off automatically.
Note: When the charging case is not carried, press and hold both of the multi-function of the
earbuds around 3 seconds to power off.
BT Connection
① Turn on the Bluetooth function on your device.
② Take out the earbuds from the charging case, and the earbuds will automatically power on.
Both earbud’ indicator light will flash red and blue alternatly.
After both earbuds paired together, the left earbud will become the master earbud, it will flash
red and blue alternatly, and the right earbud will flash blue slowly.
③ Open the device list of Bluetooth menu. Find the pairing name " V40058CBW " , click to
connect. After successful connection, the indicator light of both earbuds will flash blue slowly.
Note:
1. If the earbuds are not in pairing, and no operation within 5 minutes, they will be automatically
turned off.
2. Once connected successfully, the earbuds and the device will remember each other. And next
time they will be connected automatically.
Function Button during Using
One Click: Play/ Pause/ Answer Incoming Call/ End Call
Double Clicks: Activate Siri/ Google Voice Assistants（For the device that support these 2 voice
assistance）
Hold 1.5 Seconds: Reject an Incoming Call
Hold 3 Seconds: Power Off(When Not Receiving a Call)