User's Manual

speaker will emit a tone to indicate that the KTS-86 is now powering off.
Reconnect to Bluetooth
 You only need to pair your Bluetooth device with the KTS-86 once.
 With your previously paired device’s Bluetooth turned on and in range, power on the
KTS-86.
 The speaker will automatically reconnect to the last Bluetooth device it was connected to.
 If you have a previously paired device that does not auto-reconnect, navigate to the Bluetooth
settings menu on your device, turn on the Bluetooth feature, and select “KTS-86” from your
list of paired Bluetooth devices.
Play
 Connect your device to the KTS-86 over Bluetooth or through the AUX input..(refer to the
“Pair & Connect” section)
 Open your favorite music app and press play.
 You can control the music ,volume ,and tracks from your device, as well as control the
playback and volume from the speaker: Volume on your device and on the speaker are
controlled separately.
 Press the play button to play/pause music, or to answer/end phone calls. Press the “+”or
“-“buttons to adjust volume.
 Speaker will emit a tone when the maximum or minimum volume on the speaker has been
reached. If volume is still too low, you can also adjust the volume on your device.
 All audio, including music, games, videos, and notifications will be routed through the
KTS-86.
Important Waterproof /Safety Information
IMPORTANT:DO NOT submerge the KTS-86 in water. This device is not intended to function
properly after being under water.
 Before using the KTS-86 in a wet environment, make sure the silicone cover over the AUX
and micro USB input ports on the back of the speaker is fully closed and secured. If water
gets into either port, the speaker may not function properly
 The speaker is rated IPX4.which means the speaker can be splashed with water or left in the
rain (but not submerged in water) for approximately 5 minutes.
 If the KTS-86 gets wet, it is recommended that you dry the speaker completely before using
it again.
 All actions done with the KTS-86 are done at your own risk. While the speaker is
weather-proof and has a protective silicone case, it is not a guarantee for complete damage
protection.
Specification
Output Power:3W
Speaker Driver Size:45mm