User's Manual

User manual of KL3000-1 KL3000-2 KL3000-4 KL3000-8

KL3000-12

RF Remote Control

Parameter:

Working Voltage：DC9V

Working Current：70mA

Frequency：433.88MHZ

Modulation：ASK（ASK）

Temperature：-20-55℃

Dimension：49*31*8mm

Weight : 9.6g

Encode type: Learning code

Operation Method:

1. Match code:

Hold learning button and learning indicator light blinks, then press any buttons of remote control,

if indicator lights flashes 3 times, match code successfully. Maximum 80 remote controls can be

matched.

2. Delete code:

Hold learning button till the indicator LED lights and then off, delete successfully.

3. Set working mode:

S1 & S2 program the sequence as follows:

Jumper on S1→ Toggle

PAGE 1
User manual of KL3000-1 KL3000-2 KL3000-4 KL3000-8 KL3000-12 RF Remote Control Parameter: Working Voltage：DC9V Working Current：70mA Frequency：433.88MHZ Modulation：ASK（ASK） Temperature：-20-55℃ Dimension：49*31*8mm Weight : 9.6g Encode type: Learning code Operation Method: 1. Match code: Hold learning button and learning indicator light blinks, then press any buttons of remote control, if indicator lights flashes 3 times, match code successfully. Maximum 80 remote controls can be matched. 2.
PAGE 2
Jumper on S2→ Latched No Jumper on S1 &S2→ Momentary Working Mode: 1. Non-lock/Momentary: Press remote button A, the corresponding relay on the receiver is on; release button A, the relay is off, the same as others. 2. Self-lock/Toggle: Press remote button A, the corresponding relay on the receiver is on; press button A again, the relay is off, the same as others. 3. Inter lock/Latching: Press remote button A, the relay A is on, B is off; press button B, the replay B is on, A is off.