User's Manual

4
3. Click Add Device or + to add a new pet feeder.
4. Choose Add manually and choose Pet Feeder AP mode manually in
the add page. Notice that the other 2 options in add manually list are
not suit for this feeder, please do not choose them.
Fill in the 2.4GHz Wi-Fi network information and click Next.
Power on feeder and check that the indicator LED is flashing in RED
once every 3 seconds as same with adding feeder by Bluetooth. Then
click Next.
Indicator LED status:
Flashing slowly
Feeder is waiting for Wi-Fi network configuration;
Flashing rapidly
Feeder is configured for the Wi-Fi network and
trying to connect. If the connection fails, it will
always be rapidly.
Always on
Feeder is connected to the Wi-Fi network. It can be
turned off in the settings.
Always off
Feeder is only powered by battery or turned off
manually.