Operating Instructions

Parking monitoring function
This machine has a parking monitoring function. After the parking monitoring function is turned on, when your car is "struck", the
recorder will automatically turn on and record, record the image at the time of the incident, and escort your car.
One key mute function
In standby mode and video mode, press the up button to turn on or off recording.
Special features:
1. Rear view
First, the car charger must be connected to the recorder, and the red wire on the rear camera must be connected
to the positive electrode of the reversing light. After the car is started, the device will automatically start the video
recording state, and if there is reversing in any state, the reversing image will be displayed. The machine will
automatically return to the video mode after the reversing is visible.
（This function is not available for special models with reverse control
line as negative）
2.RESET reset
If the machine is abnormal or crashes during use, you can press the RESET button through a small needle through
the small hole of the shell to reset the machine.
3.USB storage function
Support USB storage mode and USB camera function.
4. WIFI function (in about settings)
Turn on the WIFI function in the WIFI settings.
You can connect to the mobile phone and operate the machine through the mobile phone dedicated APP
(Roadcam).
WIFI connection name: CVR150XXXXXX connection password: CVR88888.