Operating Instructions

Logger Initial Settings
To set the date and time：
1. In standby mode, press the menu button to enter the menu, the menu is divided into "video settings", "detection settings", "system settings",
"about".
2. Press "M key" to switch to "System settings" and press the key to switch to date setting and time setting;
3. Press "Up and down keys" to switch the selection arrows, press "OK" to select the current year, month and time, and the device will automatically save ;
4. After setting the date and time, press and hold the "M key" to exit the setting;
Recorder camera operation
1、When the car engine is started, the device is automatically switched on and starts recording. When the engine is switched off, it will automatically stop
recording.
2、The recorder can pause or start recording manually by pressing the "OK" key in the recording mode.
Video playback operation
1. In standby mode, press "M key" once to enter the video preview interface;
2. Press the "up and down keys" to select the video to be played, and press the "OK" key to replay the video;
3. In the state of video playback, press the "up and down keys" to switch the previous, pause/play, next, and delete options, and press OK to execute;
4. In playback mode, long press the "down button" to return to the previous directory, and long press "OK" to switch the front F/back R video directory;
5. Long press the "M key" to choose to play "normal video", "locked video", "picture";
Note: Ordinary video refers to the video that is normally recorded, and the video is automatically looped over when the video is full; locked video refers to
the video with a protection lock, this type of video does not participate in loop coverage; it is manually locked or generated in an emergency state, if the
video is The machine will automatically remind you to format the card when it occupies more than 60% of the card space.
The lock function needs to turn on the "collision sensitivity" and "parking monitoring" of the device. The higher the sensitivity, the easier it is to produce
locked video. It is recommended to set it to "low".
The machine adopts a simple 4-button setting, short press the finger to press the button, long press the finger to hold the button, and see that the
machine shows that the operation is letting go, about 2-3 seconds.