Operating Instructions

Precautions:
1. Insert the memory card:Please insert the memory card in the correct direction as prompted by the memory card notch on the device, press the
memory card until it clicks and insert it in place.
Since the video storage of the recorder has a high operating speed to the card, note that the memory card must be a high-speed card (above CLASS10).
2. Take out the memory card:Press the memory card to eject the slot.
3. Installed on the front windshield in the car
Remove the 3M adhesive paper or suction cup (optional) of the bracket of the device and fix it on the front windshield.
4. Installation:
connect power supply
Please use the original charger that comes standard with the factory to start the device and charge the built-in battery. Connect one end of the car charger
to the USB port of the device, and plug the other end of the car charger into the cigarette lighter port in the car. Once the car engine is started, the device
will automatically turn on.
Note: When the device is turned on, do not remove or insert the memory card to avoid damage to the memory card or loss of files.
Note: For the first use of a new card, it must be formatted and matched in this machine.
Note: When wiring, the car charger extension cable can be hidden and installed along the top decorative panel
of the car windshield, as shown in the figure above.