User Guide

6
01.
In the Geeni app, on
the top corner of the
Devices screen, click
Choose “Wi-Fi Camera”.
02.
Make sure the light on
the camera is blinking
blue, indicating the
device is ready to
connect, then press
Next Step.
Add device:
Easy Mode
04.
The Geeni app will
attempt to connect.
This may take a few
moments. When the
blinking light turns solid
blue, connection was
successful!
NOTE: Geeni can’t connect to
5GHz networks.
*If the connection fails, try to
connect using QR Mode.
03.
Enter your Wi-Fi
network and password.
Connect (Easy & QR Mode)
11
Settings
Two-way Audio Mode :
In this mode, there is full
two-way simultaneous
communication. While
the Press & Hold to speak
button is pressed, you will
be able to hear audio from
the camera’s microphone
while you are speaking.
This may cause an echo.
SD Card Capacity:
View the size of the SD
card, used space, and
space remaining.
Recording Mode:
Switch from motion
recording (only records
when the camera detects
motion) to continuous
recording.
Recording Schedule:
Set schedules for when
you want the camera to
record or not record video.
Format SD Card:
Press to erase microSD
card.