User's Manual

⑦ OPERATING MODES
SWITCHING STABLIZER MODES
Press the Power Button, The stabilizer enters Lock Mode each
time when powered on. (Default Mode)
Single Click Mode button to Switch into Pan Following Mode
Single Click the MODE button to enter into Pan&Tilt Follow
Mode.
Single
Press
Pan& Tilt
Follow
Mode
Pan
Following
mode
Locking
Mode
Single
Press
Single
Press
Tilt & Roll are locked.
Pan axis rotates (Left/Right)
smoothly with turn of
wrist.
Push Joystick up and down to
control the tilt of camera, use
joystick left and right to manual
pan left/right
Pan,Tilt, Roll axis are all locked.
The camera keep still and
stable, which mean Camera
cannot follow handle's
movement.
Push Joystick up and down to
control the tilt of camera, use joystick
left and right to manual
pan left/right
Roll axis is locked.
The camera pans (Left/right)
and tilts (Up/Down) are
following the movement of
camera.
Push Joystick up and down to
control the tilt of camera, use
joystick left and right to
manual pan left/right
Roll
Tilt
Pan
Tilt
Pan
手机的重心调节
10
11
Roll
Tilt
Pan
⑥ PANEL INTRUDUCTION
Status Indicator Light
Blue Light is always on- enough remaining battery
power
Power light will rapidly flash - low on charge
a. Connect the micro USB port to portable power source
such as USB power back to extend run-times.
b. Use a cable for Charging stabilizer when no power.
Use the zoom slider to control UP (Zoom In)
and Down (Zoom Out);
1. Blue Light - The Stabilizer is in operation, that the
control unit goes through to process an instruction
2. Green Light - Stabilizer has gone into working
condition.
3. Red Light:
Red Light is always on - low on charge-shut down.
Red Light is blinking rapidly - Stabilizer overload-shut
down.
4. Yellow Light – error - shut down - restart.
Control movement UP/DOWN (Tilt Motor) and
LEFT/RIGHT (Pan Motor)
*The Joystick can be used in All 3 Modes
To Power on: Press & Hold the Power/Shooting
button for 3-4 seconds
until the Status Indicator light flashes blue, and
then turns ON Green finally.
To Power off: Press and holder the
POWER Button for 3 seconds
Double-click the front and back lens to switch；
Triple-click the photo and video switch.
After Bluetooth Connected between the mobile
and stabilizer, use SHOOT button to take
photos or video；double click can be taken
continuously
Single Press to cycle through the 3 Modes
that you set.Double click the MODE button to
bring the camera to its original position.
Joystick
Power ON/OFF
MODE
Micro USB Charging Port
Zoom Control
Pan & Tilt Follow Mode
Pan Following Mode
Lock Mode
Please make notes of each motor and operating
Mode details(showing on this page), as stabilizer
comes pro-program with 3 different mode
Roll
Micro USB Charging Port
Power Indicator Light Port
POWER Indicator Light
Power Output Port
Zoom Control (In APP control only)
Status Indicator Light
Joystick
Power ON/OFF
Shooting Function
MODE Button