User's Manual

10
11
⑤ OPERATING
To Power On
长按电源键 3 秒左右打开电
源，稳定器开始工作；再次
按住 3 秒左右则关闭电源。
电源/
拍照键
Step 2: Press & Hold the Power/Shooting button for 3-4 seconds until the Status
Indicator light flashes blue, and then turns ON Green finally.
③ MOUNTING CAMERA
8
9
Power ON/OFF
Place Smartphone to mounting clip,
as show. Slide the Smartphone all the
way to right until it touches Tilt
Motor.
NOTEDS: Proper adjustment of balance ensures better power saving during operation.
The stabilizer may still function well when the gravity center is not properly configured; however, it
may lead to more power consumption on the motors, and can greatly affect the torque output.
WARNING!
ALWAYS MOUNT YOUR CAMERA PRIOR TO
POWERING ON.
FAILURE TO DO CAN DAMAGE THE UNIT!
Indicator Light
If the Smartphone does not stay leveled when mounted, please do as following:
Step 1: Loosen the Roll balance Knob.
Step 2: Make small Adjustment t by sliding the horizontal arm, Until the mobile
intersects stabilizer with a 70-100 degree.
Step 3: Tighten the Thumb Screw after the phone is well balanced in level to ensure
normal operations.
④ CHECKING BALANCE