User's Manual

ManualsBrandsShenzhen JX ROBOT Technology ManualsCell Phone AccessoriesHandheld 3-axis Gimbal Stabilizer

CONTENT

● Package List........................................................1

● Disclaimer and Warning.....................................2

● Safety Operation Guidelines...............................4

● Get to know the Stabilizer..................................6

● USB Connection..................................................7

●Mounting Camera, Checking Balance..................9

● Panel Introduction............................................10

●Operating Mode.................................................11

●Changing Orientation.........................................12

● App Operation, and Bluetooth Connection.......13

● Product Specification.........................................14

● Warranty Card................................................... 15

PACKAGE LIST

The product should be packed with following items (including this user

manual), If you are missing any items or components, please contact your

dealer immediately!

GIMBAL STABILIZER ×1

MICRO USB CABLE ×1

User Manual ×1

Summary of content (10 pages)

PAGE 1
CONTENT ● Package List........................................................1 ● Disclaimer and Warning.....................................2 ● Safety Operation Guidelines...............................4 ● Get to know the Stabilizer..................................6 ● USB Connection..................................................7 ●Mounting Camera, Checking Balance..................9 ● Panel Introduction............................................10 ●Operating Mode.......................................
PAGE 2
DISCLAIMER AND WARING DISCLAIMER AND WARING Thank you for purchasing our Stabilizer. Before you start PLEASE read this manual and become familiar with Stabilizer’s components and operating modes to ensure proper operation. The information contains herein affects your safety and your legal rights and responsibility. Failure to read and follow the instructions and warnings may result in serious injury to you or damage to your device or property.
PAGE 3
SAFETY OPERATION GUIDELINE SAFETY OPERATION GUIDELINE The Stabilizer should be used in temperatures from 0℃ to 40℃. Use of the battery in environments above 40℃ can lead to a fire or explosion. Use of battery below 0℃ can lead to serious damage. ■ CHARING THE BATTERY 1. Always use our company approved charger for charging. Our company takes no responsibility if the battery is charged using Non-Our company charger. 2.
PAGE 4
②USB CONNECTION ①GET TO KNOW THE STABILIZER The stabilizer is high-precision control device. Connect to APP, it has more face tracking, time-lapse function, etc. which can offer you professional grade video. IN-USE CHARGING Connect the Micro USB Port on the side of stabilizer's handle to a power source SUCH AS a power pack (not include) to extend run-times. MOBILE CHARGING The USB port at the bottom of the stabilizer handle can be used for charging of your Smartphone while in use on the Stabilizer.
PAGE 5
③ MOUNTING CAMERA ⑤ OPERATING To Power On Place Smartphone to mounting clip, as show. Slide the Smartphone all the way to right until it touches Tilt Motor. Step 2: Press & Hold the Power/Shooting button for 3-4 seconds until the Status Indicator light flashes blue, and then turns ON Green finally. WARNING! ALWAYS MOUNT YOUR CAMERA PRIOR TO POWERING ON.
PAGE 6
⑦ OPERATING MODES ⑥ PANEL INTRUDUCTION POWER Indicator Light Micro USB Charging Port Power Output Port Power ON/OFF Power Indicator Light Port Blue Light is always on- enough remaining battery power Power light will rapidly flash - low on charge Micro USB Charging Port a. Connect the micro USB port to portable power source such as USB power back to extend run-times. b. Use a cable for Charging stabilizer when no power.
PAGE 7
⑧ CHANGE ORIENTATION ⑨ APP OPERATION & CONNECT TO BLUETOOTH The Stabilizer comes with 2 different Way for Change Orientation Connect to Stabilizer APP Switching From Horizonta l to Vertical Step 1: Scan QR Code (For Andriod +iOS) and Download below APP for accessing. Keep the phone facing yourself and rotate the Stabilizer handle over 70 degrees in counterclockwise direction, Stabilizer will enter vertical shooting Mode.
PAGE 8
WARRANTY CARD ⑩ PRODUCT SPECIFICATIONS Product Specifications Input Vol. Operation Current Opration Temperature Min. Standard Max. 3.4V 3.7V 4.2V 150mA 1500mA 3000mA 0℃ 40 ℃ Operation Time 12h Weight 423g Pitch Angle Range 325° Roll Angle Range 325° 180° Pan Angle Range 330° Compatibale Models Controllable Pitch Angle Well balanced with camera mounted 1.
PAGE 9
§ 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Statement Specific Absorption Rate (SAR) information: This product meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies.
PAGE 10
WARRANTY CARD Custom Information Customer Name ： Contact No： Address ： Certificate of Quality Sales Information Sales Date ：： Product Serials No： This product is confirmed to meet quality standards and Permitted for sales after strict inspection.