User's Manual

2.2 Charging
4
Use cable to charge
2.3 Install the smart phone
Remove the phone case before installation, keep the phone screen
horizontally and the phone camera face left.
Pull the smart phone clamp and put the phone into it, make sure the
smart phone clamp in the middle of smart phone.
Install complete
Charge state
The first light flashes
0%-25%
25%-50%
50%-75%
75%-99%
100%
Battery power
The first light is on, the
second light flashes
The first and second lights are
on, the third light flashes
The first three lights are on,
the fourth light flashes
Four lights are on
Foldable 3 axis gimbal stabilizer User Manual