User's Manual

FIG OF WIRELESS MICROPHONE
1.Unsrew the battery cover at the end of microphone, put a 9V battery
into compartment with correct polarities, then close the cover.
2. Pushing "ON/OFF" switch to "ON" position, "PWR" indicator comes
on green. If it doesn't come on, please check the voltage of battery or
polarities. If it gets dim bit by bit, then "LOW" indicator becomes red
in using, this indicates battery is dead, please replace by another
new one.
3. Pushing "MUTE" switch to downside, audio will be cut down, noises
are prohibited to come across receiver. To use microphone, please
push "MUTE" switch to upside.
4. Please confirm frequency of transmitter same as that of receiver
before operation.