User Instructions

2) Camera mode
Press menu / mode key for a long time to switch to camera mode, press OK key to start
shooting, video icon will start flashing, and blue indicator light starts
flashing to enter video working mode;
3) Photo mode
Press menu / mode key for a long time to switch to photo mode, press OK key for photo
taking, and the screen flashes once during taking photos, indicating that the photo
is completed.
4) Video / photo playback
Press menu / mode key for a long time to switch to playback mode, and the playback
icon is displayed in the upper left corner of the screen;
Press up to select the file up;
Press the down key to select the file down;
Press OK to play the selected video file;
5) Menu settings
Press menu / mode key to call up the setting menu;
By pressing up or down key briefly, you can cycle up and down selection in each setting
item;
Select the setting item to change, and press OK to enter the change;
6) Exit the setup menu
Press menu / mode key to exit the setting status;
六： Time setting
(1) Press menu / mode key to enter the setting item continuously, press down key
to select date setting, press OK key to enter, and short press OK key to switch between
year / month / day / hour / minute / second. Adjust the required value by up / down
key, confirm modification by short press OK key, and then press menu mode key to
exit time setting.
(2) When the machine is connected to WiFi, the time will be automatically updated
Note: when the product is used, the machine will be on due to improper operation.
Press reset key to start up again, and then it can be restored to normal.
七： Installation guide
1. turn off the engine of the car.
2. insert tfcard into recorder card slot.
[note] please use high speed tfcard (C10 above)
3. fix the recorder on the windshield of the car.
4. insert the car charger into the cigarette lighter.
5. connect USB interface of recorder with charger on board with charging extension
cable.
[note] during wiring, the charging extension line can be laid along the edge of the
windshield.
6. adjust the lens position to ensure the lens is level with the ground.
7. start the engine and check whether the machine is installed correctly.
[note] when the machine is installed correctly, the system operation indicator light
will be on; The machine starts to enter the record state, and the video indicator