BLUETOOTH MINI TOWER SPEAKER MODEL: SP269PL-ASST INSTRUCTION MANUAL PLEASE READ CAREFULLY BEFORE OPERATING THIS EQUIPMENT
The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1) Read these instructions. All the safety and operating instructions should be read before the product is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference. 3) Heed all warnings.
INSTALLATION 1. Remote Sensor 2. Speakers 3. Speaker Net 1 3 2 Note: The Speaker Net can be taken out and reassembled as Figure above.
LOCATION OF CONTROLS MAIN UNIT 1. AUX IN jack 2. Indicator 3. EQ(Equalizer)button 4. POWER button 5. SOURCE button 6. VOL- (Volume Down) button 7. VOL+ (Volume Up) button 8. (Next) button 9. (Previous) button 10. (Play/Pause) button 11.
LOCATION OF CONTROLS REMOTE CONTROL 4 POWER 1 2 2 5 SOURCE 3 6 7 VOL 3 1. POWER button 2. (Previous) button 3. VOL (Volume)+/- buttons 4. SOURCE button EQ 8 5. (Mute) button 6. (Next) button 7. (Play/Pause) button 8.
BATTERY INSTALLATION--- REMOTE CONTROL -First Time Use Remove and discard the insulation tab as figure on the right -Replacing Batteries For Remote Control 1. Push and slide out the battery holder as figure 1 below. 2. Replace the battery with a new CR2025 button cell as the polarity markings on the rear of the Remote Control. 3. Close the battery holder. Fig.1 Fig.2 Fig.3 BATTERY PRECAUTIONS EFFECTIVE DISTANCE OF REMOTE TRANSMITTER Remote Sensor Approx.
GENERAL OPERATIONS 1. Insert the AC/DC Adapter plug into a conveniently located AC outlet having 100-240V~50/60Hz. The Indicate (Red) will light. 2. Press the Power button on the unit or remote control to power on the unit. 3. Press the SOURCE button repeatedly to switch to desired mode.The color of Indicator turns to corresponding color as below: ~ Blue: Bluetooth ~ Green: AUX IN 4. During Playback: ~ Press the VOL (Volume) buttons to adjust volume level as desired.
LISTEN TO EXTERNAL AUDIO DEVICES XI AUX IN EQ SOURCE VOL- VOL+ 1. Connect one end of supplied audio connection cable to the AUX IN jack on the top of the unit as the figure above. 2. Connect the other end to the Audio out/Line out/Phone jack on the external player (such like iPhone, iPad, MP3 player, Discman... etc.). 3. Power ON the unit. 4. Press the SOURCE button repeatedly until the color of Indicator turns to Green. 5. Play the music in the external player as usual.
BLUETOOTH PARING AND PLAYBACK 1. Power ON the unit. 2. Press the SOURCE button on the unit or remote control until the color of Indicator changed to Blue. 3. Turn on the BT function on the external BT device and play the music as usual. 4. During palyback: Press the VOL (Volume) +/- buttons to adjust volume level. Press the or button to skip track. Press the (Play/Pause) button to pause. Press again to resume normal playback. NOTES: In first time use, pairing the external BT device as below: A.
TROUBLESHOOTING GUIDE Check the followings before requesting service SYMPTOM POSSIBLE CAUSE No power AC/DC adapter plug not connected to the wall outlet No sound POSSIBLE SOULTION Plug to the wall outlet.
TECHNICAL SPECIFICATIONS AC/DC Adapter Input........................................................................................................AC 100-240V~50/60Hz Output...............................................................................................DC 12V 1A Speakers ...............................................................................................................................3W x 2 Bluetooth Working Distance..............................................................
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
