User's Manual

1. Press until radio FM or AM appears
on the display.
2. Press the button to switch between AM AM/FM
and FM.
3.
stations. When a station is found, the unit will
FM/AM operation
Hold and button search for the
TUNE+ TUNE-
stop and start playing.
4. Press button, then PX will appear on the
MEM
display. Press or button to select the
M+ M-
place you want the station to be stored. Then
press button again to store.
MEM
5. Press or button to listen to the preset
M+ M-
stations.
NOTE:
-The radio will automatically receive FM radio
broadcasts in stereo (when available). Alternatively,
is low, and background noise level is high.
BT operation
- Press button on the remote control to
SCAN
search and store the stations automatically.
you can manually set the radio to mono mode by
pressing ST/MO button on remote control.
the signal
strength
1. Press button until bt appears on the display
after a beep sound, the unit will start to search
for the last conncted device if it is found. If it is
2. Activate the Bluetooth connection on the external
NOTE:
BT
device.
4. bt on the display will be solid light,
Enter 0000 when asked for a password
during connecting.
not found,the unit will search for other devices.
5. Hold button on the control panel or press
PAIR
PAIR
button on the remote control to disconnect
Paring and Connecting
During Playing
-Press and button to skip to the previous or
(
next track.
-Press button to pause the playback, press again
to resume the playback.
NOTE:
buttons may not work with all
(
the Bluetooth sources.
2. Load the disc. Then the playback will start.
3. Press button to eject the disc when finished
CD/MP3 disc operation
1. Press button until CD appears
on the display.
3. When appears on the list,
choose to
pair with it.
"SOUNDLOGIC DES"
when connection
is estalished.
CD
During Playing
-Press and button to skip to the previous or
(
next track.
-Press button to pause the playback, press again
to resume the playback.
-Press button to stop the playback
-Press button to turn on or enter or exit the
RAN
random playing.
-Press button to perform the repeat playback.
REP
-Press button to play the contents in the pre-
PROG
selected order.
1.During CD/MP3 playing, press STOP, then press
PROG, “PRO ” will display on screen.
2.Press PREV/NEXT to select the track needed to
programme, at the same time, the selected
tracks
display on screen, the press PROG to confirm.
Note: If do not press PREV/NEXT
to select track
at this time, programming function will
the character
disappear.
automatically
exit after 20 seconds,
Programme procedure
3.If continuing to add tracks, repeat number 2
operation.
USB operation
1. Press the button until USB appears
on the display.
2. Insert the USB device into the USB port. Then
it will start playing.
During Playing
-Press and button to skip to the previous or
(
next track.
-Press button to pause playing, press again
to resume the play.
-Press button to stop the play, Press again
to resume.
4.To complete programming, press PLAY to start
playing the programmed tracks.
Press STOP twice to
cancel programming.
2.Load the disc,it will play automatically.
3. Press button to eject disc when finished.
USB
AM/FM
12