User's Manual

User Instructions
Making the connections
General operation
Time setting
AUX AUDIO CONNECTION
Using a 3.5mm audio cable ( supplied), it is
possible to connect an external audio device
EG:- MP3 player to the unit.
NOTE: This function requires the AUDIO
CONNECTION to be made to an external amplier.
This will NOT work connected to a TV input.
1. Connect a 3.5mm cable into the AUX IN 1 input
socket on the control panel.
2. Connect the other end to your audio devices
headphone output or Line-out.
MP3 PLAYER
3. Press the SOURCE
4. Press PLAY on the external audio source EG:-
MP3 player.
NOTE: The audio output level is effected by the
volume on the source EG: MP3 player so make
sure that is set to about 70-80% (not too loud to
avoid distortion).
5. Adjust the VOLUME control on the amplier to
set the main volume level.
AUX IN 1
button until AUX IN 1
appears on the display.
Using a RCA audio cable ( supplied), it is
possible to connect an external device
EG:- DVD player / VCR to the unit.
AUX IN 2
L R
DVD Player
Red
Red
White
Audio Output
Jacks on the
DVD / VCR / DVR
the unit.
1.Connect the AV cable to the Audio Output Jacks
(White Jack=L,
Red Jack=R) on DVD player
and Audio Input Jacks on the rear of
DVD player/VCR/DVR and etc.
NOTE:
2.Press button until AUX 2 appears on the
SOURCE
A TV can also be connected to watch video files in
the
display.
3. Activate the external device.
2. Hold TIME button on the remote control to start
3. Press TIME +/- button to set 12h or 24h.
Then press TIME button to confirm.
Alarm setting
1. Place the unit into Standby mode.
2. Hold button on the remote control to
ALARM
activate the alarm setting.
3. Press and button to adjust the hour
TIME+
TIME-
and the minute. Then press button to confirm.
ALARM
1. Place the unit into Standby mode.
4. Press or button to select the alarm
ALARM
When the alarm rings, press
Snooze Snooze Snooze Snooze Snooze Snooze Snooze Snooze button to turn Snooze
Snooze
off the ring and 9 minutes later, the alarm will ring
again.
Sleep timer
SLEEP
ranges from 10-90 minutes.
During playback, press button repeatedly
to set the
playback duration and after the time
reaches, the
unit will automatically turn itself off.
The duration
Dimmer
DIMMER
Press button to adjust the display
brightness.
screen and the hour digit will flash.
the time setting.Then "12Hr"or "24Hr" will appear
on
4. PressTIME +/- to set hour and press
5. Press TIME +/- to set minute digit.Press "TIME"
to confirm.
"TIME" to
confirmand minute digit will flash..
rings as FM ("F")or buzzer("b"). Then press
button
to confirm.
5. Press "TIME +/-" to set alarm volume level.
Snooze Snooze Snooze
11
TIME+ TIME-