User's Manual

1. lnsert the iPod or iPhone to docking directly. To connect iPad, insert the iPad adaptor to the

docking as the gure above before insert the iPad to the docking.

2. When iPod, iPhone or iPad connected, it will recharge automatically.

3. Power on the unit as previous procedures, press the SOURCE Button on the unit or Remote

Control repeatedly until "IPOD" appear on the display.

The unit will start playback automatically.

4. During playback the music/video les from iPod, iPhone or iPad:

A. Presses the Skip/Fast Search or Buttons repeatedly to skip the tracks forward/backward.

B. Press and hold the Skip/Fast Search or to fast searching the specic section of the track

forward/backward.

C. Presses the REPEAT Button on the Remote Control to set repeat modes, correspond icons will

occur on the connected iPod/iPhone/iPad's display

D. Press the RANDOM Button on the Remote Control to turn the random playback mode on or

off, correspond icons will occur on the connected iPod/iPhone/iPad's display.

E. Press the MENU Button on the Remote Control, the setting menu will appear on the connected

iPod/iPhone/iPad's display. Using the Direction ▲/▼, Skip/Fast to move the cursorwithin the

display, press the ENTER Button to conrmed the selections.

LISTEN TO FM RADIO

Extend the FM antenna wire on the rear of the unit and relocation it to get the best reception.

1) Power ON the unit as previous procedures.

2) Press the SOURCE button on the unit or remote control repeatedly until FM frequency appears

on the display.

3) Press or button on the remote control repeatedly to search the specic radio station.

(or press and hold the or button 1 second then release the button. The unit will auto

search the next or previous available radio station then stop).

4) To store the current received radio station into the memory. Press the / M button on the

Remote Control; CH XX will appear on the display. Press the CH+/CH- buttons on the Remote

Control repeatedly to select channel number as desire. Press the / M button again to store

the current radio station into the selected channel (Total 20 FM stations can be preset into the

memory)

5) To listen to the preset channels, press the CH+/CH- buttons on the Remote Control or the

button on the unit repeatedly to the desired channel.

6) Press the REPEAT/ST button on the remote control repeatedly to set the radio to stereo or

mono mode. STEREO or MONO will appear on the display.

LISTEN TO iPod/iPhone/iPad

SBI-9015说明书JLE-12239 9 2012-7-16 17:48:06