32'' Bluetooth Soundbar MODEL:PSB3200-FD-PL Please read this instruction manual carefully and keep it for future reference
IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: The lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
-- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To assure continued operation, follow the attached installation instructions and use only shielded cables when connecting to other devices.
10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments / accessories specified by the manufacturer.
PLACEMENT AND MOUNTING 1. Placing the device on table - Ventilation When placing the Sound Bar on an entertainment center, bookshelf, or any type of enclosed space, be sure to allow at least 2-3 inches of space around the Sound Bar for ventilation. If the Sound Bar is enclosed in a tight space, without ventilation, heat generated from the Sound Bar could produce a potential heat hazard.
Mounting to a wall 2.1 Mounting to a wooden wall 27. 6 in che s screws not included A. Mark the position of the mounting screws on the wall using a pencil. B. Drill the screws directly into the marks that you have made on the wall and leave approx. 0.3 inches length to hook the sound bar. C. Put the sound bar onto the mounting screws. Make sure they are firm and stable. 2.2 Mounting to a brick wall 27. 6 in che s screws and plastic fixing plug are not included A.
LOCATION OF CONTROLS: Front View 1. Indicator 3. Speaker 3. Speaker 2. Remote sensor Rear View LINE IN R AUX IN DC 9V L LINE IN AUX IN 4. AUX IN jack R DC 9V L 5. LINE IN jacks 6. DC IN jack Top View Standby /Source 7. Standby/Source button Standby /Source Play /Pause Play /Pause Vol- Vol+ Vol- Vol+ 10. Volume up button 9. Volume down button 8.
REMOTE CONTROL STANDBY 1 6 2 7 3 4 8 5 STANDBY button 5. (Play/pause) button 2. VOL - (Volume down) button 6. (Mute) button 3. SOURCE button 7. VOL + (Volume up) button 1. 4. (Previous) button 8.
BATTERY INSTALLATION OF REMOTE CONTROL FIRST TIME USE ●Remove and discard the insulation tab as figure on the right. ●Replacing Batteries For Remote Control 1. Push and slide out the battery holder as figure 1 below. 2. Replace the battery with a new CR2025 button cell as the polarity markings on the rear of the Remote Control. 3. Close the battery holder. Fig.1 Fig.2 Fig.3 BATTERY PRECAUTIONS Follow these precautions when using a battery in this device: 1.
GENERAL OPERATION 1. Connect the AC/DC adapter to the unit and wall outlet. The red indicator will light and the unit is in standby mode. 2. Press and hold the Standby/Source button on the unit or press the STANDBY button on remote control to turn on the unit. Press the Standby/Source button on the unit or press the SOURCE button on remote control repeatedly to switch to desired mode. The color of indicator will turn to : Blue............................................................................
BLUETOOTH PAIRING AND CONNECTION For first time use or re-pairing, pair the unit to an external Bluetooth (BT) device as follows: 1. Power ON the unit as previously explained. 2. Press the Standby/Source button on the unit or press the SOURCE button on remote control repeatedly until the indicator turns Blue, and a voice tone sounds "Bluetooth Mode". 3. Power ON the external BT Device and select Bluetooth to enter into search mode. when " PROSCAN " appears, click it to start pairing.
LISTEN THROUGH AUX IN An external (Auxiliary) audio source (ie.,personal CD player or MP3 player) can be connected to this unit and heard through the speakers. 1. Plug one end of the Aux In cable into the AUX IN jack on the rear of the unit. 2. Plug the otehr end of the Aux In cable into the AUX OUT or LINE OUT jack of the external audio source. Audio Player LINE IN To Audio Out Jack AUX IN R DC 9V L Rear view of the unit 3. Power on the unit as previously explained. 4.
LISTEN THROUGH LINE IN An external Video/Audio player (such as TV, DVD player, VCR, etc.) can be connected to this unit and heard through the speakers. 1. Plug one end of RCA White and Red cable into the LINE IN jacks on the rear of the unit. 2. Plug the other end of RCA White and Red cable into audio out jacks of TV or external device as the illustration shown as below. NOTE: Make sure to connect to AUDIO OUT. If you connect it into AUDIO IN of external device, you will not hear the sound.
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION No power Power AC/DC Adapter Connect the power AC/DC adapter not connected to the unit or wall outlet. The unit is in standby mode Press and hold Standby/Source button on the unit or press button on remote control to turn on the unit from Standby mode. No sound Volume in minimum position Raise volume level by pressing the VOL (Volume) + button.
GENERAL SPECIFICATIONS Power Input....................................................... ...........AC 100-240V~; 50/60Hz Power Output...............................................................9V 1300mA Audio Power.............................................................................................5W x 2 (tested in open area) Bluetooth Effective Range in Open Area.........................................Up to 32 feet Remote Effective Range.......................................................
LIMITED PRODUCT WARRANTY This quality product is warranted to be free from manufacturer’s defects in material and workman-ship, provided that the unit is used under the normal operating conditions intended by the manufacturer. Should you have any problem with this product, please and it is highly recommended to visit our website at www.curtisint.
