Instruction Manual
www.naxa.com Page 17
Using OPTI Mode
Press MODE [8] to set the active mode to OPTI.
Use a optical audio patch cable to connect devices with
a optical audio out connector (e.g., TVs, DVRs, Hi-Fi
stereo and home theater components).
Operate the external device as directed by its manu-
facturer to control playback.
⚠L
This optical connection only supports the
uncompressed PCM signal format.
Using USB & SD Modes
Install a USB drive or SD memory card and then press
MODE [8] to set the active mode to USB or SD.
Install a compatible USB drive or memory card with
music les on it. Please refer to the Specications sec-
tion to learn more about compatibility.
⚠L
Music les must be saved to the root direc-
tory. The sound bar will not play les that
are saved in a folder.
To do this... ...do this
Pause or resume playback. Press
.
Skip to the next track. Press .
Skip to the previous track. Press
.