Instruction Manual

Page 14 Naxa Electronics

Manual Station Preset

To save a station as a preset:

1. Press TUN– or TUN+ to tune to the station you want

to save.

2. Press the FM SCAN button the remote. The display

screen [2] will ash “CH00”.

3. Press M+ on the remote to change the preset sta-

tion (e.g., CH01, CH02).

4. Press FM SCAN to save the station to the selected

preset station.

Using Bluetooth

Mode

Press MODE [8] to set the active mode to BT.

Pairing a Bluetooth

Device

You will need to pair your Bluetooth device with the

sound bar the rst time you use them together.

1. Turn the sound bar on and press MODE [8] to set

the active mode to BT. The sound bar will now be

ready to pair with a device.

2. Use your Bluetooth device to search for avail-

able devices. The sound bar will announce itself as

“NAXA-NHS-7008.”

your device asks for one.

⚠L

Make sure Bluetooth

is enabled on your

device. Please refer to the instructions that

came with your device to learn more about

how to connect it to other Bluetooth devices.

Only one device can be paired with the sound

Select NAXA-NHS-7008. Use the pairing code

“0000” if