Instruction Manual

www.naxa.com Page 13
Adjusting the Volume
• Use the VOL– and VOL+ keys [6, 7] to decrease or
increase the volume level, respectively.
• Press the MUTE key on the remote to disable sound
output completely. Press the MUTE key again to
restore sound output.
Using FM Radio Mode
Press MODE [8] to set the active mode to FM.
FM Radio Controls
To do this... ...do this
Tune to a higher frequency Press TUN+
Tune to a lower frequency Press TUN–
Auto-tune to a higher station Press and hold TUN+
Auto-tune to a lower station Press and hold TUN–
Tune to the next preset station Press M+
To do this... ...do this
Save a station to preset memory Press FM SCAN
Scan for stations and auto save
them to preset memory
Press and hold FM
SCAN
Optimizing FM Radio Reception
• Fully extend the FM antenna wire [15] and position
it for best radio reception.
Automatic Station Scan
Use the station scan feature to nd stations within
broadcast reception range and save them to preset
memory.
1. Press and hold the FM SCAN button on the remote.
The sound bar will search for and store stations au-
tomatically.