BLUETOOTH SPEAKER Model: SBB-081FG AUX TUN- TUN+ VOL- VOL+ SOURCE Instruction Manual Please read this instruction manual carefully and keep it for future reference.
• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • WARNING: • CAUTION: may result in hazardous radiation exposure. • WARNING: compliance could void the user’s authority to operate the equipment. • WARNING: Do not place the unit on top of any soft, porous, or sensitive surfaces to avoid damaging the surface. Use a protective barrier between the unit and surface to protect the surface.
SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. This apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
INCLUDED IN THIS PACKAGE 1 x Bluetooth® Stereo Soundbar 1 x Power adapter 1 x Instruction manual 1 x Remote control 1 x CR 2025 button cell (included) 1 x 3.5mm aux in cable 1 x RCA audio cable 2 x Wall mount brackets 4 x Screws 4 x Wall anchors PRODUCT OVERVIEW Front View AUX AUX TUN- TUN+ 1 2 VOL- TUN- TUN+ VOL+ SOURCE VOL- 3 4 VOL+ 5 1. AUX IN jack 4. Remote sensor 2. Tune down / previous Tune up / next 3. LCD display 5. Volume - (volume down) Volume + (volume up) 6.
Rear View AUX AUX2 FM ANT DC 15V OPTICAL IN AUX AUX2 FM ANT DC 15V OPTICAL IN 1 2 3 1. Optical audio input 2. FM antenna 3. AUX IN jack 4.
Remote Control 1 2 10 3 11 5 12 7 13 8 14 9 16 4 6 1. Source Button 2. Standby Button 3. FM SCAN Button 4. TUNE - Button / Previous Track 5. M + (Memory +) Button 6. EQ Button 15 7. VOL – (Volume –) Button 8. BASS – Button 9. Treble – Button 10. Mute Button 11. TUNE + Button / Next Track 5 12. CLOCK / MO / ST Button 13. VOL + (Volume +) Button 14. BASS + Button 15. Play / Pause Button 16.
WALL MOUNTING INSTRUCTIONS 1 26” +0.25” –0.25” Metal Bracket Metal Bracket 1. Using figure 1 above as a guide, measure the Stereo Soundbar to determine the position of the where the metal brackets and screws should be mounted on the wall. Make sure the two brackets are mounted at the same level. 2 Wall Anchors Metal Bracket Screws 2. Insert the wall anchors into the screw holes and then insert the screws to fix the metal brackets onto the wall. 3 Stereo Soundbar Wall (side view) Metal Bracket 3.
BATTERY INSTALLATION - Before installation Remove and discard the insulation tab. Out of the box the Remote Control has a battery and will be usable after the tab is removed. - How to replace battery for the remote control 1. Push and slide out the battery holder as shown below. 2. Replace the battery with a new CR2025 button cell with the polarity (+) side upward. 3. Slide the battery holder back into the remote control.
3.5mm AUX IN (Front of Unit) - 3.5mm AUX IN source may include: ·MP3 player, smartphones, tablets, computers or laptops - 3.5mm AUX IN connection: 1. Connect a 3.5mm aux in cable (supplied) between the headphone or AUX/Audio output of the personal audio player and the 3.5mm AUX IN jack on the front of the unit. 2. Power ON the unit and press SOURCE button repeatedly until “AUX” appears on the display. Set your personal audio player/computer to play.
BLUETOOTH - Pairing: 1.Press SOURCE button until "BT" appears on the display. 2. Turn ON Bluetooth functionality on your Bluetooth device. Typically, Bluetooth controls are found in the device’s tools or settings menu (see your user manual). Turn ON Bluetooth connectivity and make your device “discoverable”. 3. Choose “add a new Bluetooth device” or “setup Bluetooth device” on your device. It will start to search. Once “Stereo Soundbar” appears on your device, select it.
OPTICAL IN - Connecting 1. Press SOURCE button until "OPTI" appears on the display. 2. Follow the figure below to make connections. NOTE: Not all entertainment systems are set up the same way. The diagram below is only one example of how the connection can be made. Optical Out of TV/DVD/Etc.
SPECIFICATIONS Power source of the remote control................................................ DC 3V, 1x CR 2025 button cell Output of the power adapter........................................................................................ DC 15V, 2A Audio output........................................................................................................................ 10W x 2 Power consumption...................................................................................................
Innovative Technology Electronics Corp, Limited Warranty: 90 Days Labor, One Year Parts Innovative Technology Electronics Corp. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty is “Not” transferable. IT agrees, within the initial “90 Day” period, to repair or replace the product if it is determined to be defective at “No Charge”.
