User's Manual

3.5mm AUX IN (Front of Unit)

- 3.5mm AUX IN source may include:

gMP3 player, smartphones, tablets, computers or laptops

- 3.5mm AUX IN connection:

1. Connect a 3.5mm aux in cable (supplied) between the headphone or AUX/Audio output of

the personal audio player and the 3.5mm AUX IN jack on the front of the unit.

2. Power ON the unit and press SOURCE button repeatedly until “AUX” appears on the display.

Set your personal audio player/computer to play.

NOTE: If there is no sound, or if the volume is not loud enough, you may need to increase the

volume on the audio source.

- During playing

gPress MUTE button to turn off the sound. Press again to resume the sound.

gPress VOLUME+/- buttons to adjust the volume level.

gPress BASS+/- buttons to adjust bass level.

gPress TREBLE+/-buttons to adjust treble level.

gPress EQ button to switch between POP/JAZZ/CLASSIC/ROCK/NORMAL.

RCA AUX IN (Back of Unit)

- RCA AUX IN sources may include

gTV/DVD/VCR

- RCA AUX IN connection

1. Connect the RCA audio cable (supplied) to the audio output jack on TV/DVD/VCR/Etc. and the

AUX IN jack on the rear of the unit.

2. Press SOURCE button repeatedly until “AUX” appears on the display.

NOTE: Before using the RCA AUX IN connection, make sure the 3.5mm aux in cable is not

inserted into the 3.5mm AUX IN jack. If it is, audio will play from the audio source connected to

the 3.5mm AUX IN jack, NOT the RCA AUX IN jack.

Audio Out Jacks of

TV/DVD/VCR/DVR

AUX IN Jacks of

Stereo Sounbar

Connect to the 3.5mm Audio Out jack

of external audio devices including Tablets,

Laptops, Smartphones, MP3 Players, etc.

SOURCE

TUN- TUN+AUX

VOL- VOL+

3.5mm AUX IN jack on

Stereo Soundbar

3.5mm Aux In Cable (Included)

AUX