Instruction Manual

Play music/movie in the paired/
c
onnected device as usual and make
sure the volume level of it is in high
level.
Sound distortion/rattle
Reduc
e the volume level of the paired/
c
onnected device.
Bluetooth
reception failure
Put the external BT dev
ice c
lose to the
unit.
Input source incorrect
The unit is in power off mode
The paired/connected device
is not in playback mode
The external device is
too far from the unit
Remote Control
not functioning
Out of range
The battery in the remote
control is drained
Point the remote control to the remote
sensor on the unit within 16 feet, +/-30
degress
Replace with new battery.
No sound or
sound weak
Volume level in minimum position
SYMPTOM
TROUBLESHOOTING
POSSIBLE CAUSE
POSSIBLE SOLUTION
No power
The adapter is not connected
Connect the adapter to the unit and wall
outlet
Press the button on the unit or on
remote control to power on the unit
Raise the volume level by pressing the
+ button on the unit
Or press VOL+ button on remote control
Reduce the volume level by pressing
the - button on the unit
Or press VOL- button on remote control
19
Press the button on the unit
repeatedly or use the corresponding
button on remote control to switch to
desired mode.
HDMI IN(ARC)
not working
Not paired
Pair the unit with the BT Device as the
procedures stated in this manual.
Not insert to HDMI ARC channel
The ARC control is off
Please read which channel is the ARC
channel for your TV, and insert this HDMI
cable to HDMI ARC channel. it only
works in HDMI ARC channel.
Please go to the TV setup menu, turn
on the CEC control and turn on the ARC
from the setup menu.
Volume level too high