User's Manual

MUTE (Remote Control Only)

- Press the MUTE button on remote control to mute the sound output from

speaker temporarily, the Mode Indicator LED will flash.

- Press the

button again to resume to normal speaker playback.

LISTENING TO AUDIO FROM A TV/DVD PLAYER/VCR OR DVR

You can connect the JSBW-650 to other external audio devices using the AUX-IN 1

RCA connectors located on the back of the unit.

1. Connect the external TV/DVD/VCR/DVR to AUX-IN 1 RCA connectors on the back

of the unit (RCA connection cable included). Make sure

the color coded plugs are

attached to the corresponding color coded connectors on the device.

2. Press the POWER button to turn the unit on.

Select external audio input by pressing the SOURCE button on the remote control or

tap the

/SOURCE button on the main unit repeatedly to select AUX IN 1 mode,

Mode Indicator LED turns green.

The volume level can now be controlled through the main unit. Operate all other

functions on the external device as usual.

AUXILIARY INPUT

This unit provides an auxiliary audio signal input jack for connecting external audio

devices like MP3 players, CD players and listen to them through the speakers of this

unit.

1. Use an audio cable (included) with one 3.5 mm stereo plug on each end of the

cable.

2. Plug one end into the AUX-IN 2 jack on the right hand side (top panel) of main unit

and the other end of the cable into the Line-out Jack or Headphone Jack of your

external audio device.

3. Turn on the external audio device

and the main unit.

4. To select auxiliary audio input, press the SOURCE button on remote control or tap

/SOURCE button on main unit repeatedly to select AUX IN 2 mode, Mode Indicator

LED turns

orange.

5. The volume level can now be controlled through the main unit. Operate all other

functions on the auxiliary device as usual.

NOTE:



If you connect this unit to the Line-Out Jack of your external device then you only

need to adjust the volume control of this unit. If you connected the Headphone Jack

of your external device then you may need to adjust both the volume control of your