User's Manual

BLUETOOTH OPERATION

PAIRING (LINKING) A BLUETOOTH ENABLED CELL PHONE OR OTHER

BLUETOOTH ENABLED DEVICE to the JSBW-650

1. With the power on, press the SOURCE button on remote control or tap the

/SOURCE button on main unit repeatedly to select Bluetooth mode. The Mode

Indicator LED turns blue and will be flashing. The JSBW-650 is now ready to pair

(link) with your Bluetooth device.

2. Turn on the Bluetooth feature of your cell phone and enable the search or scan

feature to find the JSBW-650.

3. Select "JSBW-650" from the device list when it appears on your device screen. If

required, enter the pass code “0000” to pair (link) the JSBW-650 with your cell

phone.

4. After successfully pairing (linking) your cell phone with the JSBW-650, the Mode

Indicator LED stops flashing and remains lit blue. You can now play music from

your cell phone or Bluetooth device wirelessly to the JSBW-650.

Note: If you want to connect the JSBW-650 to another cell phone after pairing

successfully, then you need to turn off the Bluetooth on the paired cell phone

first if it is in range before going through the above steps. Otherwise, the

JSBW-650 will automatically reconnect to the previously linked cell phone or

device.

5. Press the VOLUME +/- button

to adjust the desired volume level.

6. To turn off the JSBW-650 Bluetooth, press the POWER button on remote

control or press and hold the

/SOURCE button on main unit to turn the unit to

standby mode. Mode Indicator LED turns red. Don’t forget to also turn off the

Bluetooth feature on your cell phone or Bluetooth device.

Notes:

1.) Refer to manual of your cell phone or other Bluetooth enabled device for

Bluetooth operation, since it may vary from model to model.

2.) If your Bluetooth enabled device does not support A2DP, it will not play the music

through the speaker, even after it's paired (linked).

3.) If you are pairing (linking) your computer to the JSBW-650 using Bluetooth, you

may need to set the JSBW-650 as your computer’s default sound device.

CONTROLLING THE MUSIC PLAYBACK ON YOUR BLUETOOTH DEVICE USING

THE REMOTE CONTROL

1. Press the

POWER button to turn on the unit.

2. Turn on Bluetooth of your cell phone or device which was previously paired with the

JSBW-650, press the SOURCE button on remote control or tap

/SOURCE button