User Manual

5
Wire harness for 12V DC power & 6 speakers guide diagram
Basic Operations
TIME SETUP
3. Once completed, the minute digit will be flashing, then press the UP or DOWN button to adjust minute. when finished,
1. When in standby mode, press the power button on the unit or remote to turn on the unit.
MODE SHIFT
Note
-Once the disc is loaded, the unit will automatically shift to DVD mode.
2. Press FUNC button on the remote control or FUNC button on the unit to shift modes between
bt /DVD/USB/SD/FM/AM/ TV/AUX.
-Skip and play/pause functions may not be compatible with all connected bluetooth devices.
4. Press PREV and NEXT buttons to skip to the previous and next track..
2. Activate the Bluetooth connection on the external device.
find "RP3000BT" in your device pairing list and select it to pair and connect your device to the unit.
1. Press FUNC button on the remote control until " bt " appears on the screen.
BLUETOOTH
Note
5. Press button to select play or pause mode.
3. The unit will search and reconnect to previous bluetooth device that was connected if available. If it is your first
time connecting,
Carefully read wiring diagram: the wrong connections reversing polarity
(positive and negative power wiring) can cause distortation and / or damage the power amplifiers.
1.Press to enter standby mode, press and hold CADJ/MEMO button on the remote control to enter time setup interface.
The LED
display will show the default time with the hour digit flashing.
2. Press UP and down to select 12 or 24 hours mode, then press CADJ/MEMO to confirm, after confirming, the hour digit
will be flashing, press UP or DOWN button to adjust hour, press CADJ/MEMO again to confirm hour.
Press CADJ/MEMO to confirm, time setting is over.