User Manual

10
No Sound
*M
ake sure th
e connections are secure between player and speakers.
*Make sure the correct input is selected on the monitor.
No Picture
*Make sure the connecti
on are secure between RP3000BT and the monitor.
*M
ake sure the RP3000BT is in the correct mode (e.g., DVD mode)
Disc does not play
*Make sure the disc is loaded correctly (label side is facing up on the disc tray
).
*Make sure the disc is clean and not damaged.
Remote contr
oller does not work
*Move any obstacles between RP3000BT and remote control.
*Poi
nt the remote controller at the remote control sensor
.
*Check the battery.
TECHNICAL
SPECIFICATIONS
Laser
Wave length 650um
Video AUTO/NTSC
Frequency response 20 Hz-20KHz
Signal/noise ratio >60dB
Dynamic rang >60dB(1KHz)
Video out output level:1vp-p/ Load impedance :75 imbalance/
negative polarity
Power supply DC 12-14.4V
Power consumption
<55W
Dimensions (WxHxD) 218(L)x185(H)x169(D)mm
AM Frequency range AM 520 ~ 1710KHz
FM Frequency range FM87.5 ~ 108MHz
Output power 30W(RMS)
TM
For
your convenience, we have enlisted some points to solve problems, you may encounter while using the
CONNEX RP3000BT.
TM
X