User's Manual

www.naxa.com Page 5
Pairing a Device with
Bluetooth
®
A device must be paired with the speaker before using
them together for the rst time.
To place the speaker in Pairing mode, press the PAIR
button. The status indicator will ash blue quickly.
Then:
1. Make sure Bluetooth is enabled on your device. En-
able it if it hasn’t.
2. Use your device to search for nearby Bluetooth
connections. (This function is usually in the Blue-
tooth settings menu; refer to your device’s instruc-
tion manual to learn more.)
3. The speaker will announce itself as “NAS-3070.”
Select it from the list of devices.
4. If your device asks for a passcode, use “0000” to
complete the pairing process.
When the speaker is paired and connected to a device,
the status indicator will light a steady blue.
Using the AUX Input
Connector
Connect devices without Bluetooth
®
by using the AUX
connection. A 3.5mm stereo patch cable is required to
make this connection.
1. Use a 3.5mm stereo patch cable to connect the de-
vice’s headphone or line-out jack to the AUX con-
nector [7] found on the back of the speaker.
2. Turn on the device and the speaker. Lower the vol-
ume on both.
3. Set the device volume to 80% of its maximum and
then start playback.
4. Press the + button [4] to increase the volume grad-
ually to a comfortable level.
⚠L
The active speaker source will switch to
AUX when a device is connected to the AUX
connector [7]. Audio output from Bluetooth
will be disabled while the AUX connector is
being used.