Manualshelf

User's Manual

ManualsBrandsShenzhen Junlan Electronic ManualsAudio EquipmentWALL MOUNTABLE 2.1-CHANNEL BLUETOOTH SOUNDBAR SPEAKER
78910111213141516
11
2.) If your Bluetooth enabled device does not support A2DP, it will not play the music
through the speaker, even after it's paired (linked).
3.) If you are pairing (linking) your computer to the JSBW-650 using Bluetooth, you
may need to set the JSBW-650 as your computer’s default sound device.
CONTROLLING THE MUSIC PLAYBACK ON YOUR BLUETOOTH DEVICE USING
THE REMOTE CONTROL
1. Press the POWER button to turn on the unit.
2. Turn on Bluetooth of your cell phone or device which was previously paired with the
JSBW-650, press the SOURCE button on remote control or tap /SOURCE button
on main unit repeatedly to select the Bluetooth mode, the Mode Indicator LED turns
blue and begins flashing.
3. After the Bluetooth device is paired with the JSBW-650, wait for around 5 seconds
and then press the PLAY/PAUSE
button on remote control to start music
playback from your cell phone or Bluetooth device.
4. Press the PLAY/PAUSE
button to pause or resume playback.
5. Press the VOLUME+/- button to adjust your desired volume level
6. If necessary, press the TREBLE or BASS +/- buttons on the remote control to adjust
the separate treble and bass levels.
7. Press the or button on the remote to select the desire music track.
8. Press the POWER button on remote control or press and hold the button on
main unit to turn off the unit after listening.
Re-linking to a cell phone or Bluetooth device
If your cell phone or Bluetooth device is already paired with the JSBW-650, but became
unlinked at some point, even with both Bluetooth devices turned on. You can re-link
them by:
1. Press and hold the PAIR button to re-link your cell phone. The Mode Indicator LED
will turn blue and flash while linking.
2. Select the JSBW-650 from the devices list on your cell phone for linking. The Mode
Indicator LED stops flashing and remains lit blue if the JSBW-650 and your cell
phone have been re-linked successfully.
3. You can also re-link the JSBW-650 by using Bluetooth operation of your cell phone.
Please refer to operation manual of your cell phone for more information.
PRESET EQ (REMOTE CONTROL ONLY)
The JSBW-650 features 5 different EQ modes to enhance your listening experience.
You can select the desired effect by pressing the “EQ” button on remote control
repeatedly at following sequence: