User's Manual

9
2.) Removed the exhausted battery and then install 1 new “CR2025” lithium
battery according to the polarity diagram on the battery compartment.
3.) Insert the battery holder into the remote control and make sure it locks into place.
NOTE: Only use a well-known brand of battery to ensure the longest life and best
performance.
LISTENING TO THE FM RADIO
TUNING THE FM RADIO
1. Press the POWER button to turn on the unit.
2. Press the SOURCE button on remote control or tap the /SOURCE button on
main unit repeatedly to select FM radio mode, the Mode Indicator LED turns to
purple color.
3. To manually tune a radio station, press the TUNE +  / TUNE -  button on the
remote control repeatedly to change stations. Use the manual tuning method to
tune to weaker stations that are occasionally skipped during Automatic Tuning.
4. To automatically tune to the next radio station with the strongest signal, press and
hold the  /  button on the remote for 1-2 seconds until the purple FM indicator
begins to flash. Release the button or tap the TUNE + button on main unit. The
tuner will stop scanning when it receives the next strongest station signal.
6. Press the VOLUME +/- button to adjust the volume control to the desired level.
7. If necessary, press the EQ to select one of the preset EQ settings or the TREBLE
and BASS +/- buttons on the remote control to adjust the separate treble and bass
levels.
Battery Precautions
 Replacement of batteries must be done by an adult.
 The supply terminals are not to be short-circuited.
 Non-rechargeable batteries are not to be recharged.
 Exhausted batteries are to be removed.
 Only batteries of the equivalent type are to be used.
 Batteries are to be inserted with the correct polarity.
 Dispose of batteries properly. Do not dispose of batteries in fire. The batteries
may explode or leak.