BLUETOOTH SOUNDBAR SYSTEM MODEL: JSB-200 INSTRUCTION MANUAL Please read this instruction manual carefully and keep it for future reference.
Insert the small plug from supplied AC/DC adaptor to DC IN jack on the rear of the unit and insert the AC/DC adaptor to the wall outlet having AC 100-240V~, 50/60 Hz. NOTE:This AC/DC adapter is intended to be correctly operated in a vented indoor wall outlet. AC/DC adapter To the DC IN jack on the rear of unit. 1.
MOUNTING 1. Mounting the device on wooden wall We recommend having this speaker professionally mounted. By using the included wall mounting accessories, the sound bar can be mounted onto a wall. 25.9 inches Hole s dis tan in s am ce:2 5.9 inch es eh oriz onta l lev el supplied Metallic Bracket supplied Screws supplied Metallic Bracket supplied Screws 1. Mark the position of the mounting screws on the wall using a pencil. 2.
PRODUCT OVERVIEW Front View Back View AUX-IN 1 jacks SUBWOOFER OUT jack DC IN jack Side View VOLUME + AUX-IN 2 Jack POWER/SOURCE VOLUME 5
REMOTE CONTROL 1. STANDBY 2. VOL- ( volume down ) 3. SOURCE 4. BASS5. TREBLE6. 7. ( play/pause ) 8. (mute) 9. VOL+ ( volume up ) 10. BASS + 11. PAIR 12. TREBLE + 13. EQ ( Equalizer ) 14. STANDBY 1 8 2 3 9 4 PAIR 5 6 7 10 11 12 13 14 BATTERY INSTALLATION - Before installation Remove and discard the insulation tab. Out of the box the Remote Control has a battery and will be usable after the tab is removed. -Replace battery for the remote control 1.
AUX-IN 1 CONNECTION - RCA AUX IN sources may include •TV/DVD/VCR - RCA AUX IN connection 1. Connect the RCA audio cable (supplied) to the audio output jack on DVD player and AUX 1 or AUX 2 jack on the rear of DVD. 2. Press SOURCE button repeatedly until the indictaor turns green. White Red -During playback •Press MUTE button to turn off the sound. Press again to resume the sound. •Press VOLUME+/- buttons to adjust the volume level. •Press BASS+/- buttons to adjust bass level.
AUX-IN 2 CONNECTION - AUX IN source may include: •Personal audio players •Personal computers or laptops - AUX IN connection: 1. Connect a stereo 3.5mm jack cable (supplied) between the headphone or LINE/Audio output of the personal audio player and the AUX-IN 2 jack on the right side of the unit. 2. Power on the unit and press SOURCE button repeatedly un til the indicator turns orange. S et your personal audio player/computer to play.
BLUETOOTH -Pairing 1. Press SOURCE button repeatedly to enter BT mode. The indicator is blue. 2. Turn off the Bluetooth functionality of other devices that are paired with your unit. Only one device can be used with the Bluetooth function at a time. 3. Turn on Bluetooth functionality on your Bluetooth device. Typically, Bluetooth controls are found on the device’s tools or settings menu (see your user manual). Turn on Bluetooth connectivity and make your device “discoverable”. 4.
TROUBLESHOOTING GUIDE &KHFN WKH IROORZLQJV EHIRUH UHTXHVWLQJ VHUYLFH 6<03720 3266,%/( &$86( 3266,%/( 628/7,21 No power AC plug not connected to the wall outlet Plug to the wall outlet.
GENERAL SPECIFICATIONS Power source of the remote control..................DC 3V, 1x CR 2025 button cell Output of the power adapter.................................................. DC 16V,1.8 A Audio output.......................................................................................2x10 W Power consumption.............................................................................25 W Bluetooth working range.......................................................................
FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
