User's Manual
‐ 5‐
BEFORE USING THE UNIT
Read this before attempting any operations
●As the unit may become warm during operation, always leave sufficient
space around the unit for ventilation.
●The voltage supplied to the unit should match the voltage as printed on the
rear panel. If you are in any doubt regarding this matter, consult an electrician.
●Choose the installation location of your unit carefully. Avoid placing it in direct
sunlight or close to a source of heat. Also avoid locations subject to vibrations
and excessive dust, heat, cold or moisture.
●Do not place the unit on an amplifier/receiver.
●Do not open the cabinet as this might result in damage to the circuitry or
electrical shock. If a foreign object should get into the unit, contact your dealer
or service company.
●When removing the power plug from the wall outlet, always pull directly on
the plug, never yank the cork.
●To keep the laser pickup clean, do not touch it, and always close the disc tray.
●Do not attempt to clean the unit with chemical solvents as this might damage
the finish. Use a clean, dry cloth.
●Keep this manual in a safe place for future reference.
DO NOT MOVE THE UNIT DURING PLAYING
During playing, the disc rotates at high speed. Do not lift or move the unit
during playing. Doing so may damage the disc or the unit.
WHEN MOVING THIS UNIT
When changing the unit’s location or packing the unit for moving, be sure to
remove the record or disc. Moving this unit with the record or disc loaded may
result in damage to this unit. If the unit is to be packed and moved a great
distance, it is also advisable to tighten the turntable transport locking screw.
DISCS
●Always place the disc on the disc tray with the label side up.(Compact discs
can be played or recorded only on one side.)
●To remove a disc from its storage case, press down on the center of the case
and lift the disc out, holding it carefully by the edges.
●Should the disc become dirty, wipe the surface radially(from the center hole outward