User's Manual



‐ 12‐
LISTENING TO THE RADIO
1. Press the POWER button to turn the unit ON.
2. Set the function knob to the RADIO in position.
3. Switch the AM/FM button to select AM or FM.
4. Turn the tuning knob slowly to receive station.
5. In FM mode, the LED indicator of FM will light up when a stereo station tuned in.
6. Turn the VOLUME knob to adjust the volume.
NOTE:
If the reception is poor, fully extend the antenna or relocate the unit to get best signal.
AUX IN AND AUX OUT
AUX IN
1. Press the POWER button to turn the unit ON.
2. Set the function knob to the PHONO/AUX in position. Connect AUX-IN cord into the
AUX IN jack to play the external source, such as CD player,"MP3"etc...
3. Play track as usual and turn the VOLUME knob to adjust the volume.
NOTE:
When playing through AUX IN Jack, stop the record playing first.
AUX OUT
Using the AUX OUT jack will allow you to run the audio from your unit into a home stereo
or other stereo source with amplifier.
Make sure to connect the white plug to white jack(Left) and the red plug to the red
jack(Right).
LISTENING TO A RECORD
Before operation, completely loosen the transportation screw by turning it clockwise with a
coin or screwdriver, detach the stylus guard(the white plastic cover).
1. Press the POWER button to turn the unit ON.
2. Set the function knob to the PHONO/AUX in position.
3. Gently open the dust cover and be careful not to pinch your finger.
4. Select the proper speed 33, 45 or78 rpm.
5. Put a record on the turntable. When playing a 45RPM record, please use the 45 RPM
adapter.
6. Gently push the clamp to the right to release the tone arm.