Specifications

22
BLUETOOTH TRANSMITTER OPERATION
In most cases the Bluetooth connection will be established smoothly. If it is failed, please
check as follows:
Problem Possible Cause Solution
The device is not compatible
Be sure the device is an BT receiver,
such as BT speaker, BT earphone…
The Bluetooth function of the
device may malfunction
Connect the awaiting device to your
smartphone via BT. If it still fails, it is
due to the awaiting device, not your
DVD player. If connected, check other
items and solve them according to the
recommendations list in Row Solution of
this chart,
then reset the awaiting
device or switch it back to BT mode,
and make the scan again.
Your device has already been
connected to other devices via BT.
Power off other devices to disconnect the
connection, and make the scan again.
The device is not turned on. Turn on your device.
The device is not in BT mode Switch your device to BT mode.
The Pair name of the device
is remembered wrongly
Remember it correctly.
The strong wave transmitter such
as cordless phone, Wi-Fi hotspot
or micro oven is working.
Stop them and make the scan again.
The portable DVD player is
too far from the device
Move them closer (within 10 m).
The paired device is not the
desired one.
The font color the pair name of the
connected device on the SETUP menu
will become yellow. Make sure it is the
right one. If not, disconnect it and
make the scan again.
The Pair name of the device is
remembered wrongly
Remember it correctly.
No picture
Video signal transmission via BT is not
supported.
The disc is dirty, distorted or
scratched.
Clean the disc, or change another disc
and try again.
The DVD player is in a bumpy
state.
Place the player on a steady surface.
The volume of the connected
device is set too high/low
Set the volume of the connected
device with a proper level.
The audio file played is corrupted.
Play normal audio files.
The connected Device
malfunctions
Connect your DVD player to
another device to try again.
No sound
The sound of the connected
device is muted or turned to
minimum level.
Unmute it, and set the volume to a
proper level.
Cannot find the
pair name of the
device to be
connected
Pairing is
succeeded, but
still not working.
Playback
interruption
Sound too
large/small