Specifications

16
GENERAL OPERATIONS
1.
Lift the panel and turn to desired angle. Slide the Power ON/OFF switch to "ON"
position to power on the unit.
2.
Slide the OPEN switch to right to open the disc door. Place a disc on the center
spindle with label side facing up. Close the disc door and the player will start playback
automatically.
3. During playback:
~ Press the
or button repeatedly to fast search for a specifi c section forward
or backward. Press the
button to resume normal playback.
~ Press the or button repeatedly to skip to specifi c track.
~ Press the button to pause, press it again to resume normal playback.
~ Press the VOL(volume)+/- buttons to adjust volume level.
~ Press the
button to stop playback. The player will remember the point where the
disc was stopped. Press the
button to start playback from this point.
Press the button twice to stop completely, press the button to start playback
from the beginning of the disc.
4. Press the POWER button on the Remote Control to turn the player to standby mode.
The Bluetooth indicator will light in red. Press the POWER button again to turn the
player on from standby mode. (For saving energy, always power off the player by
slide the Power ON/OFF switch on the player to OFF position or unplug the AC/DC
Adaptor from player and wall outlet)
Repeat Playback: (DVD)
ƽ During playback, press the REPEAT button once to repeat the current Chapter.
ƽ Press the REPEAT button twice to repeat the current Title.
ƽ Press the REPEAT button the third time to repeat all.
ƽ Press the REPEAT button repeatedly to turn off the repeat mode.
CD Program:
1.
During CD playback, press the PROG (Program ) button to open program window as below:
...[CD]TRACK16
2/16
TRACK06
TRACK02
...
TRACK 15
TRACK 16
TRACK 16
Repeat Playback: (CD)
ƽ During playback, press the REPEAT button once to repeat the current Track.
ƽ Press the REPEAT button twice to repeat all the tracks.
ƽ Press the REPEAT button repeatedly to turn off the repeat mode.