Specifications
14
Battery installation
1. Press the tabs on the battery door and lift it off.
2.
Install two (2) x AAA size batteries into the
battery compartment as the figure on right and
the polarity markings inside battery
compartment.
3. Replace the battery door.
Battery Precautions
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specifi ed.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to
the battery compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and
Carbon Zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to
prevent damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture. (Follow battery manufacturers directions.)
6. Do not dispose of batteries in fi re, batteries may explode or leak.
7. Clean the battery contacts and also those of the device prior to battery installation.
MAKING CONNECTIONS
Remarks:
1. When there is an obstacle between the unit and the transmitter, the transmitter may
not operate.
2. When direct sunlight, an incandescent lamp, fl uorescent lamp or any other strong
light shines on the remote control of the unit, the remote operation may be unstable.
Remote Control Working Range
For the Remote Control