Safety Information

9
GENERAL OPERATIONS
1. Lift up the panel and turn to desired angle. Slide the Power ON/OFF switch to "ON"
position to power on the unit, the Blue Indicator on front of the player will light.
2. Slide the OPEN switch to left to open the disc door. Place the disc on the center
spindle with label side facing up. Close the disc door and the player will start
playback automatically.
3. During playback:
~ Press the
or buttons repeatedly to fast search for a specifi c section forward
or backward. Press the button to resume normal playback.
~ Press the or buttons repeatedly to skip to specifi c track.
~ Press the button to pause, press it again to resume normal playback.
~ Press the VOL(volume)+/- buttons to adjust volume level.
~ Press the button to stop playback. The player will remember the point where the
disc was stopped. Press the button to start playback from this point.
Press the button twice to stop completely, press the button to start playback
from the beginning of the disc.
4. Press the POWER button on the Remote Control to turn the player to standby mode.
The Red Indicator will light. Press the POWER button again to turn the player on from
standby mode (For saving energy, always power off the player by slide the Power
ON/OFF switch on the player to OFF position or unplug the AC/DC Adaptor from
player and wall outlet.)
Repeat Playback: (DVD)
●
During playback, press the REPEAT button once to repeat the current chapter.
●
Press the REPEAT button twice to repeat the current title.
●
Press the REPEAT button the third time to repeat all.
●
Press the REPEAT button repeatedly to turn off the repeat mode.
Repeat Playback: (CD)
●
During playback, press the REPEAT button once to repeat the current track.
●
Press the REPEAT button twice to repeat all the tracks.
●
Press the REPEAT button repeatedly to turn off the repeat mode.
(CD/DVD) Program:
1. During CD or DVD playback, press the PROG ( Program ) button.
2. Using the Direction and Numeric buttons to select and set the desired TT (Title), CH
(Chapters), tracks (for CD) of the movie (music) you wants. The Program menu will
appear as follows.
3. Using the Direction buttons to select and highlight the "Start" button on the screen
then press the OK button to start program playback
.